{"title":"Urethane Foam \u0026 Rubber Casting","description":"Urethane Foam \u0026amp; Rubber Casting","products":[{"product_id":"a-b-polyurethane-foam","title":"A\u0026B Polyurethane Foam 2LB Density","description":"\u003cp\u003e\n\u003cstrong\u003ePolyurethane Pour-in-Place Foam\u003c\/strong\u003e is a two component liquid material that, when mixed together, will expand to approximately 25 times its volume at 21 degrees Celsius.\n\u003c\/p\u003e\n\n\u003cp\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 2 lb per cubic foot\n\u003c\/p\u003e\n\n\u003cp\u003e\nUsed to fill cavities and voids, insulation for tanks and holds, and as flotation for docks, etc.\n\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"2 litre Kit","offer_id":46330016432428,"sku":"300350","price":89.99,"currency_code":"CAD","in_stock":true},{"title":"7.4 Litre Kit","offer_id":46330016465196,"sku":"300351","price":274.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/ABPolyurethaneFoam2LBDensity.png?v=1746740789"},{"product_id":"foam-it-8","title":"Smooth-On FOAM-iT!™ 8","description":"\u003cp\u003eSmooth-On’s\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries are two-component water blown rigid foams that are versatile and easy to use. F\u003cstrong\u003eOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed 2A:1B by weight. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproduct you are using) and develop a uniform cell structure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™ 8\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a unique, self-skinning foam with a finer, more uniform cell structure than the other\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™ 8\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ecan be cast in blocks as a machinable prototype modeling board.\u003c\/p\u003e\n\u003cp\u003eAll\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIGNITE™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants and are used for a variety of art\/ craft, industrial design and special effects applications.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eStore and use at room temperature (73°F\/23°C). Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eXTEND-IT™ Dry Gas Blanket\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A RELEASE AGENT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eUrethane foams are adhesive and will stick \/ bond to many surfaces. We recommend\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto release urethane foam from most surfaces. If the release application is particularly difficult (example; releasing urethane foam from urethane rubber), we recommend an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollowed by an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not use Universal Mold Release by itself, or any other silicone based release agents. This will collapse the foam.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKnow the mix ratio for the FOAM-iT!™ product you are using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the correct amounts of Parts A and B into mixing container,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emix thoroughly for 45 seconds.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStir quickly making sure that you scrape the sides and bottom of the mixing container several times. Be careful not to splash low viscosity material out of the container.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRemember, foams cure quickly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not delay between mixing and pouring.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u0026amp; Curing -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. Allow space in the containment field for the foam to grow as it expands to its ultimate volume. Allow foam to cure for at least 20 minutes before handling (\u003cstrong\u003eFOAM-iT!™ 10 SLOW\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 1 hour). Cure time will be affected by mass and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMass Concentration \/ Mold Configuration –\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePouring large amounts at a time in certain mold configurations (i.e. cylinder) could cause excess heat to be generated and result in splitting (fissures). Step pouring in layers may resolve this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImproving Surface Finish \u0026amp; Minimizing Voids With Back Pressure -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eCapping the mold cavity opening with a board that has predrilled holes will improve surface finish for some foams. For more information, watch the video at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/backpressure\"\u003esmooth-on.com\/backpressure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFully Cured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam can be sanded, machined, drilled, etc. (wear NIOSH approved respirator). Foam can also be primed and \/ or painted.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1.25 Quart","offer_id":46330165002540,"sku":"115447","price":51.99,"currency_code":"CAD","in_stock":false},{"title":"3 Gallon","offer_id":46330165035308,"sku":"115448","price":310.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-foam-it-8.png?v=1781044253"},{"product_id":"eva-foam-half-dowel","title":"EVA Foam Half Round Dowel","description":"\u003cp\u003e\u003cspan style=\"margin: 0px; padding: 0px; line-height: normal; font-family: Lato, HelveticaNeue, \" helvetica neue sans-serif font-size:\u003eHalf Round foam doweling, made from \u003c\/span\u003e\u003cspan style=\"font-family: Lato, HelveticaNeue, \" helvetica neue sans-serif font-size:\u003ehigh-density\u003c\/span\u003e\u003cspan style=\"margin: 0px; padding: 0px; line-height: normal; font-family: Lato, HelveticaNeue, \" helvetica neue sans-serif font-size:\u003e EVA foam. Great for rounded edge detailing\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Arda Wigs Canada","offers":[{"title":"10mm","offer_id":46330186367276,"sku":"123447","price":11.99,"currency_code":"CAD","in_stock":true},{"title":"15mm","offer_id":46330186301740,"sku":"123448","price":12.99,"currency_code":"CAD","in_stock":true},{"title":"20mm","offer_id":46330186334508,"sku":"123456","price":17.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/products\/half_20round.png?v=1692058440"},{"product_id":"great-stuff-gaps-cracks","title":"Great Stuff Gaps \u0026 Cracks Spray Foam 20oz","description":"\u003cp\u003eGreat Stuff Gaps \u0026amp; Cracks 20oz\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGREAT STUFF Gaps \u0026amp; Cracks is a polyurethane-based insulating foam sealant that fills, air-seals and insulates small gaps (up to 1 inch) inside or out. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBut you probably guessed as much from the name. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhat you might not have guessed is how easy it is to use (thanks to the straw applicator) or how it expands to take the shape of cracks and voids to form a durable, airtight, and water-resistant bond that eliminates unwanted airflow and helps reduce condensation.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GREAT STUFF","offers":[{"title":"Default Title","offer_id":46679422861612,"sku":"041220231","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/GreatStuffGaps-CracksSprayFoam-20oz.png?v=1747431300"},{"product_id":"bungee-cord-blue-pc12bl","title":"Perfect Bungee Cord Blue PC12BL","description":"\u003cp\u003e12IN\u003c\/p\u003e\n\u003cul id=\"WCMspec\"\u003e\n\u003cli\u003e12” long - will safely stretch to 2'\u003c\/li\u003e\n\u003cli\u003eNearly indestructible multi-purpose bungee cord with non-marring nylon coated S-Hook ends\u003c\/li\u003e\n\u003cli\u003eMade of FLEXAPURE biothane won't crack, break, split or become brittle\u003c\/li\u003e\n\u003cli\u003eWithstands exposure to saltwater, oil and most common household chemicals\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Perfect Bungee","offers":[{"title":"Default Title","offer_id":46679898816812,"sku":"1004761","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/6A973_AS01.jpg?v=1737501462"},{"product_id":"bungee-cord-black-pc12bk","title":"Perfect Bungee Cord Black PC12BK","description":"\u003cp\u003e12IN\u003c\/p\u003e\n\u003cul id=\"WCMspec\"\u003e\n\u003cli\u003e12” long - will safely stretch to 2'\u003c\/li\u003e\n\u003cli\u003eNearly indestructible multi-purpose bungee cord with non-marring nylon coated S-Hook ends\u003c\/li\u003e\n\u003cli\u003eMade of FLEXAPURE biothane won't crack, break, split or become brittle\u003c\/li\u003e\n\u003cli\u003eWithstands exposure to saltwater, oil and most common household chemicals\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Perfect Bungee","offers":[{"title":"Default Title","offer_id":46679898947884,"sku":"1004762","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/BIH-PC12BK.jpg?v=1737501110"},{"product_id":"bungee-cord-blue-pc18bl","title":"Perfect Bungee Cord Blue PC18BL","description":"\u003cp\u003e18IN\u003c\/p\u003e\n\u003cul id=\"WCMspec\"\u003e\n\u003cli\u003e18” long - will safely stretch to 3'\u003c\/li\u003e\n\u003cli\u003eNearly indestructible multi-purpose bungee cord with non-marring nylon coated S-Hook ends\u003c\/li\u003e\n\u003cli\u003eMade of FLEXAPURE biothane won't crack, break, split or become brittle\u003c\/li\u003e\n\u003cli\u003eWithstands exposure to saltwater, oil and most common household chemicals\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Perfect Bungee","offers":[{"title":"Default Title","offer_id":46679899210028,"sku":"1004765","price":10.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/6A973_AS01_34328cc9-175c-4bfc-8089-7249f09a9ac6.jpg?v=1737501592"},{"product_id":"bungee-cord-blue-pc24bl","title":"Perfect Bungee Cord Blue PC24BL","description":"\u003cp\u003e24IN\u003c\/p\u003e\n\u003cul id=\"WCMspec\"\u003e\n\u003cli\u003e24” long - will safely stretch to 4'\u003c\/li\u003e\n\u003cli\u003eNearly indestructible multi-purpose bungee cord with non-marring nylon coated S-Hook ends\u003c\/li\u003e\n\u003cli\u003eMade of FLEXAPURE biothane won't crack, break, split or become brittle\u003c\/li\u003e\n\u003cli\u003eWithstands exposure to saltwater, oil and most common household chemicals\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Perfect Bungee","offers":[{"title":"Default Title","offer_id":46680011997484,"sku":"1005650","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/6A973_AS01_727a5f38-0f60-4149-9bd4-c3cc17be3ed9.jpg?v=1737501599"},{"product_id":"nwr-rubber-runner-black-wide-ribbed-36in-x-1-8in-x-75ft","title":"NWR Rubber Runner Black Wide Ribbed-36In X 1\/8In","description":"\u003cp\u003e36IN X 1\/8IN X 75FT\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese Wide Ribbed Mats are available with a vinyl or rubber construction. Their ribbed surface increases traction while creating a barrier between users and hard flooring. These mats act as economical protection in industrial applications with moderate to heavy traffic.\u003c\/span\u003e\u003c\/p\u003e","brand":"North West Rubber","offers":[{"title":"Default Title","offer_id":46680232362284,"sku":"111214","price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/nwr-rubber-runner-black-ribbed.png?v=1770330602"},{"product_id":"carbon-core-divinycell-pvc-foam","title":"Carbon Core (Divinycell) Pvc Foam","description":"\u003cp\u003e48IN X 1\/2IN X 96IN\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46680429691180,"sku":"112381","price":217.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"fome-core-hangers-100-pak","title":"Fome Core Hangers 100-Pak","description":"\u003cp\u003eFome Core hangers provide hanging points for compatible foam-core display boards. The 100-piece pack suits display assembly or replenishing supplies for repeated signage projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack: 100 hangers\u003c\/li\u003e\n\u003cli\u003eApplication: foam-core boards\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the hanger attachment to the board construction and thickness. Confirm the completed sign’s weight and the mounting surface before hanging it.\u003c\/p\u003e","brand":"Redco","offers":[{"title":"Default Title","offer_id":46680626397484,"sku":"113600","price":18.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"nwr-rubber-runner-black-diamond","title":"NWR Rubber Runner Black Diamond 1\/8in 3ft x 75ft Roll","description":"\u003cp\u003eBlack diamond-pattern rubber runner in the listed 1\/8-inch thickness and 3-foot width, with a 75-foot roll format. Plan the run length and edge transitions for the installation.\u003c\/p\u003e\n\u003cp\u003eConfirm the selling unit and surface suitability before ordering. Secure and maintain the runner so its edges do not create a trip hazard.\u003c\/p\u003e","brand":"North West Rubber","offers":[{"title":"Default Title","offer_id":46680641929516,"sku":"113674","price":10.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/nwr-rubber-runner-diamond.png?v=1770330675"},{"product_id":"smooth-on-pmc-121-50-wet-2-pint-kit","title":"Smooth-On PMC 121\/50 Wet","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-121\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries urethane rubbers feature convenient one-to-one by volume mix ratios.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-121\/50\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a “wet-only” mold rubber that is long lasting and durable when used in a variety of applications including reproduction of ornamental plaster, precast concrete and ceramic case molds. Note: “wet” rubber has a higher net shrinkage value vs. “dry” rubber.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-121 Series\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emold rubbers are easy to mix and pour and are exceptionally strong. They are suited for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. Vibrant colors can be achieved by adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSo-Strong™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eColor Tints, available from Smooth-On.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Materials should be stored and used in at room (73°F\/23°C). Humidity should be low. These products have a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) are fast drying sealers suitable for sealing porous surfaces without interfering with surface detail. Shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNon-Porous Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAfter dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(16 lbs.\/7 kg. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Allow rubber to cure overnight (at least 16 hours) at room temperature (73°F\/23°C) before demolding. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting gypsum plaster materials, sponge the mold with a soap solution for better plaster flow and easy release.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Shrinkage will be higher with wet vs. dry rubbers. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53335356637484,"sku":"115185","price":55.99,"currency_code":"CAD","in_stock":true},{"title":"2 Gal","offer_id":53335356670252,"sku":"115186","price":357.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-pmc-121-50-wet.png?v=1781649086"},{"product_id":"smooth-on-pmc-121-30-dry-2-pint-kit","title":"Smooth-On PMC-121 30\/DRY","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-121\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries urethane rubbers feature convenient one-to-one by volume mix ratios.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-121\/30 Dry\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis exceptionally strong and abrasion resistant for soft urethane mold rubbers. It does not exude oil and can be used for casting waxes, Smooth-On liquid plastics, gypsum plasters and other materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-121 Series\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emold rubbers are easy to mix and pour and are exceptionally strong. They are suited for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. Vibrant colors can be achieved by adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSo-Strong™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eColor Tints, available from Smooth-On.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Materials should be stored and used in at room (73°F\/23°C). Humidity should be low. These products have a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) are fast drying sealers suitable for sealing porous surfaces without interfering with surface detail. Shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNon-Porous Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAfter dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(16 lbs.\/7 kg. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Allow rubber to cure overnight (at least 16 hours) at room temperature (73°F\/23°C) before demolding. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting gypsum plaster materials, sponge the mold with a soap solution for better plaster flow and easy release.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Shrinkage will be higher with wet vs. dry rubbers. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53210911146284,"sku":"115339","price":36.99,"currency_code":"CAD","in_stock":false},{"title":"2 Gal","offer_id":53210911179052,"sku":"115340","price":191.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/pmc-dry-121-30.png?v=1778714066"},{"product_id":"smooth-on-pmc-121-30-wet-2-pint-kit","title":"Smooth-On PMC 121\/30 Wet","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-121\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries urethane rubbers feature convenient one-to-one by volume mix ratios.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ePMC™-121\/30 Wet\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis exceptionally strong and abrasion resistant for soft urethane mold rubbers. It exudes oil that aids in demolding hard plasters and concrete.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-121 Series\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emold rubbers are easy to mix and pour and are exceptionally strong. They are suited for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. Vibrant colors can be achieved by adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSo-Strong™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eColor Tints, available from Smooth-On.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Materials should be stored and used in at room (73°F\/23°C). Humidity should be low. These products have a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) are fast drying sealers suitable for sealing porous surfaces without interfering with surface detail. Shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNon-Porous Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let dry for 30 minutes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAfter dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(16 lbs.\/7 kg. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Allow rubber to cure overnight (at least 16 hours) at room temperature (73°F\/23°C) before demolding. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting gypsum plaster materials, sponge the mold with a soap solution for better plaster flow and easy release.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Shrinkage will be higher with wet vs. dry rubbers. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53335344906540,"sku":"115342","price":54.99,"currency_code":"CAD","in_stock":false},{"title":"2 Gal","offer_id":53335344939308,"sku":"115343","price":264.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-pmc-121-30-wet.png?v=1781648874"},{"product_id":"smooth-on-foam-it-3lb-hard-2-pint-kit","title":"Smooth-On FOAM-iT! 3","description":"\u003cp\u003eSmooth-On’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries are two-component water blown rigid foams that are versatile and easy to use.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproduct you are using) and develop a uniform cell structure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-IT!™ 3\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis tack-free in about 4 - 6.5 minutes, developing handling strength in 20 minutes and full cure in 2 hours.\u003c\/p\u003e\n\u003cp\u003eAll\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIGNITE™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants and are used for a variety of art\/ craft, industrial design and special effects applications.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eStore and use at room temperature (73°F\/23°C). Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eXTEND-IT™ Dry Gas Blanket\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A RELEASE AGENT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eUrethane foams are adhesive and will stick \/ bond to many surfaces. We recommend\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto release urethane foam from most surfaces. If the release application is particularly difficult (example; releasing urethane foam from urethane rubber), we recommend an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollowed by an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eby itself, or any other silicone based release agents. This will collapse the foam.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKnow the mix ratio for the FOAM-iT!™ product you are using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the correct amounts of Parts A and B into mixing container,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emix thoroughly for 45 seconds.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStir quickly making sure that you scrape the sides and bottom of the mixing container several times. Be careful not to splash low viscosity material out of the container.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRemember, foams cure quickly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not delay between mixing and pouring.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u0026amp; Curing -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. Allow space in the containment field for the foam to grow as it expands to its ultimate volume. Allow foam to cure for at least 20 minutes before handling (\u003cstrong\u003eFOAM-iT!™ 10 SLOW\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 1 hour). Cure time will be affected by mass and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMass Concentration \/ Mold Configuration –\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePouring large amounts at a time in certain mold configurations (i.e. cylinder) could cause excess heat to be generated and result in splitting (fissures). Step pouring in layers may resolve this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImproving Surface Finish \u0026amp; Minimizing Voids With Back Pressure -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eCapping the mold cavity opening with a board that has predrilled holes will improve surface finish for some foams. For more information, watch the video at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/backpressure\"\u003esmooth-on.com\/backpressure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFully Cured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam can be sanded, machined, drilled, etc. (wear NIOSH approved respirator). Foam can also be primed and \/ or painted.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53210876969260,"sku":"115444","price":36.99,"currency_code":"CAD","in_stock":true},{"title":"2 Gal","offer_id":53210877002028,"sku":"115445","price":199.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/foam-it3.jpg?v=1778710454"},{"product_id":"smooth-on-foam-it-fast-10lb-hard-2-pint-kit","title":"Smooth-On FOAM-iT! 10","description":"\u003cp\u003eSmooth-On’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries are two-component water blown rigid foams that are versatile and easy to use. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproduct you are using) and develop a uniform cell structure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-IT!™ 10\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis tack-free in about 4 - 6.5 minutes, developing handling strength in 20 minutes and full cure in 2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIGNITE™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants and are used for a variety of art\/ craft, industrial design and special effects applications.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eStore and use at room temperature (73°F\/23°C). Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eXTEND-IT™ Dry Gas Blanket\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A RELEASE AGENT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eUrethane foams are adhesive and will stick \/ bond to many surfaces. We recommend\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto release urethane foam from most surfaces. If the release application is particularly difficult (example; releasing urethane foam from urethane rubber), we recommend an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollowed by an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eby itself, or any other silicone based release agents. This will collapse the foam.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKnow the mix ratio for the FOAM-iT!™ product you are using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the correct amounts of Parts A and B into mixing container,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emix thoroughly for 45 seconds.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStir quickly making sure that you scrape the sides and bottom of the mixing container several times. Be careful not to splash low viscosity material out of the container.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRemember, foams cure quickly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not delay between mixing and pouring.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u0026amp; Curing -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. Allow space in the containment field for the foam to grow as it expands to its ultimate volume. Allow foam to cure for at least 20 minutes before handling (\u003cstrong\u003eFOAM-iT!™ 10 SLOW\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 1 hour). Cure time will be affected by mass and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMass Concentration \/ Mold Configuration –\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePouring large amounts at a time in certain mold configurations (i.e. cylinder) could cause excess heat to be generated and result in splitting (fissures). Step pouring in layers may resolve this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImproving Surface Finish \u0026amp; Minimizing Voids With Back Pressure -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eCapping the mold cavity opening with a board that has predrilled holes will improve surface finish for some foams. For more information, watch the video at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/backpressure\"\u003esmooth-on.com\/backpressure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFully Cured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam can be sanded, machined, drilled, etc. (wear NIOSH approved\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53341866918188,"sku":"116627","price":35.99,"currency_code":"CAD","in_stock":false},{"title":"2 Gallon","offer_id":53341866950956,"sku":"116628","price":202.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-foam-it-10.png?v=1781730032"},{"product_id":"smooth-on-ecoflex-00-10-1-1-2-pint-kit","title":"Smooth-On Ecoflex 00-10","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erubbers are platinum-catalyzed silicones that are versatile and easy to use.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erubbers are water white translucent and can be color pigmented with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSilc Pig™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epigments for creating a variety of color effects. You can also add Smooth-On’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto further lower the viscosity.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esilicone thickener can be added by weight to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esilicones for brushable applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erubbers are suitable for a variety of applications including making prosthetic appliances, cushioning for orthotics and special effects applications (especially in animatronics where repetitive motion is required).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Ecoflex™ 00-10 cures with a “tacky” surface.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e– Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWarmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e– Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber. Note: Even with a sealer, platinum silicones will not work with modeling clays containing heavy amounts of sulfur. Do a small scale test for compatibility before using on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- Although not usually necessary, a release agent will make demolding easier when pouring into or over most surfaces.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a proven release agent for use with silicone rubber. Mann Ease Release™ products are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003eIf there is any question about the effectiveness of a sealer\/release agent combination, a small-scale test should be made on an identical surface for trial.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air in liquid rubber. Your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar \/ 100 KPa). Leave enough room in container for material expansion. Vacuum material until it rises, breaks and falls. Vacuum for 1 minute after material falls.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring \/ Post Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Allow rubber to cure as prescribed at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePost curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F\/80°C for 2 hours and 212°F\/100°C for one hour. Allow mold to cool to room temperature before using.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Using As A Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- When first cast, silicone rubber molds exhibit natural release characteristics. Depending on what is being cast into the mold, mold lubricity may be depleted over time and parts will begin to stick. No release agent is necessary when casting wax or gypsum. Applying a release agent such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) prior to casting polyurethane, polyester and epoxy resins is recommended to prevent mold degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThickening Ecoflex™ Silicones\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis made especially for thickening Smooth-On’s silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTHI-VEX™. See the THI-VEX™ technical bulletin\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThinning Ecoflex™ Silicones\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Smooth-On’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewill lower the viscosity of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esilicones for easier pouring and vacuum degassing.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edisadvantage\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis that ultimate tear and tensile are reduced in proportion to the amount of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eadded.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIt is not recommended to exceed 10% by weight of total system (A+B).\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSee the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etechnical bulletin (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMold Performance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53210787610924,"sku":"116697","price":54.99,"currency_code":"CAD","in_stock":true},{"title":"2 Gal","offer_id":53210787643692,"sku":"116741","price":319.15,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/ecoflex-00-10.jpg?v=1778708788"},{"product_id":"smooth-on-clearflex-95","title":"Smooth-On Clear Flex 95 - 1.25 Quart","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eClear Flex™ 95\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 95\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecures at room temperature with negligible shrinkage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eCured castings are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear\u003c\/li\u003e\n\u003cli\u003eFlexible\u003c\/li\u003e\n\u003cli\u003eUV Resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVibrant colors and color effects are achieved by adding pigments. Applications include making clear-cut molds, model reproductions, decorative cast pieces, special effects, prototype parts.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eStore and use at room temperature (73°F\/23°C). These products have a limited shelf life and should be used as soon as possible. Environmental humidity should be as low as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wearing a NIOSH approved respirator will minimize inhalation of residual fumes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eTo prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent. The best sealer for sealing porous materials is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Available from Smooth-On). Spray shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Allow sealer to dry thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eA release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent (such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSelecting A Mold Rubber\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePour into a urethane rubber mold (\u003cstrong\u003eVytaflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane – release agent required), tin cured silicone mold (\u003cstrong\u003eMold Max™ 10, 14NV, 20, 25, 30 or 40\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esilicone) or\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMold Star™ 15, 16 or 30\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eplatinum cured silicone mold.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50 will not work in a Mold Max™ 10T, 15T or 20T silicone mold.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using Mold Max silicone;\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto prevent cure inhibition, post-cure newly silicone mold for 8 hours at 60° C \/ 150° F and let cool prior to casting resin. If you are unsure about surface compatibility, a small scale trial casting should be made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Best Results Before Pouring Clear Flex™ Into Mold:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePre-heat rubber mold at 212°F \/ 100°C for 4 hours. This will minimize chances of fish-eyeing, suck back, corner rounding, large bubbles, etc. in finished casting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBefore you begin, pre-mix Part B thoroughly to re-disperse pigments that may have settled.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eUsing a gram scale,\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003edispense required amounts of parts A and B into a mixing container and mix for 3 minutes. Scrape the sides and bottom of the container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e(16 lbs.\/7 kg. or more) at one time, use a mechanical mixer (i.e. turbine mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again. If coloring or filling\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 95\u003c\/strong\u003e, add filler or pigment dispersion to Part B and mix thoroughly before adding Part A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaterial is mass sensitive and will exotherm. Large amounts of material cast at one time will generate heat and will shrink in proportion to mass. The more material cast in a large concentration, the higher the shrinkage. Amount and nature of shrinkage will depend on casting thickness and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eVacuuming Material\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e- If vacuum degassing prior to pouring, your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar \/ 100 KPa). Leave enough room in container for material expansion. Vacuum material until it rises, breaks and falls. Vacuum for 1 minute after material falls.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- If casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 95\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einto a rubber mold, pour mixture in a single spot at the lowest point of the mold. If encapsulating an object, do not pour the mixture directly over the object. Let the mixture seek its level. A uniform flow will help minimize entrapped air.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Best Results\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eBest results are obtained using a pressure casting technique. After pouring the mixed compound, the entire casting assembly (mold, dam structure, etc.) is placed in a pressure chamber and subjected to 60 PSI (4.2 kg\/cm2) air pressure for at least two hours.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eCastings will cure faster and achieve maximum physical properties and heat resistance if\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eClear Flex™ 95\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis post cured. Post curing is recommended if castings are thin or low mass concentration. Castings should be post cured in a mold or support structure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Cure Schedule:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eAllow the material to cure for 6–8 hours at room temperature followed by 16 hours at 150°–160°F (65°–72°C). Allow casting or part to cool to room temperature before demolding.\u003c\/p\u003e\n\u003cp\u003eFor most applications, room temperature curing (73°F\/23°C) for 24–48 hours is adequate. Castings will reach ultimate physical properties at room temperature in 5–7 days. Castings removed from mold before 12 hours may exhibit a tacky surface that can be eliminated by exposing casting to 150°F\/65°C for 4–6 hours. If you are pouring less than 1\/4 in. \/ 0.64 cm of material, the casting should be heat post cured.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eCAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. \u003c\/strong\u003eWith adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712249581868,"sku":"117406","price":108.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-clearflex-95.png?v=1781044926"},{"product_id":"smooth-on-pmc-780-80a-dry","title":"Smooth-On PMC 780 Dry - 1.25 Quart","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-780\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a premium performance urethane rubber that offers exceptional strength, durability and abrasion resistance.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780 DOES NOT CONTAIN MOCA\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– a known cancer causing agent and hazard. Mixed two parts A to one part B by weight or volume,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane pours easily and cures at room temperature with negligible shrinkage to a solid Shore 80A rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePick The One Best Suited For Your Application:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOriginal PMC™-780 Dry does not exude oil.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNew\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780 Wet\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econtains a built in release agent to aid in demolding concrete. (Note: “wet” rubber has a higher net shrinkage value over time vs. “dry “ rubber.)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eBoth are used around the world for casting abrasive materials such as concrete (pre-cast concrete, making concrete stamping pads, etc.) and gypsum plasters with high exotherms.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780 Dry\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis also commonly used to make rubber mechanical parts of varying configurations (gaskets, wheels, and pullies) as well as ball mill liners and vibration\/shock pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- This product has a limited shelf life and should be used as soon as possible. Materials should be stored and used at room temperature (73°F\/23°C). Humidity should be low. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is a fast drying sealer suitable for sealing porous surfaces without interfering with surface detail. You can also use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNon-Porous Surfaces\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplying A Release Agent -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is drastically reduced after opening. Immediately replacing the lids on containers after dispensing product will prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: Pre Mix the Part B before using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the required amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(24 lbs.\/11 kgs. or more) at one time, we suggest using a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact SmoothOn or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- Allow the mold to cure (at least 48 hours) at room temperature (73°F\/23°C) before demolding. Do not cure rubber in temperatures less than 65°F\/18°C. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003egypsum plaster materials,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esponge the mold with a soap solution for better plaster flow and easy release.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712249614636,"sku":"117408","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-pmc-780-dry.png?v=1781730613"},{"product_id":"smooth-on-pmc-780-80a-wet-1-25-quart","title":"Smooth-On PMC 780 Wet","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-780\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a premium performance urethane rubber that offers exceptional strength, durability and abrasion resistance.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780 DOES NOT CONTAIN MOCA\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– a known cancer causing agent and hazard. Mixed two parts A to one part B by weight or volume,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane pours easily and cures at room temperature with negligible shrinkage to a solid Shore 80A rubber.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eNew\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780 Wet\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econtains a built in release agent\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto aid in demolding concrete.\u003c\/p\u003e\n\u003cp\u003e(Note: “wet” rubber has a higher net shrinkage value over time vs. “dry “ rubber.) Both are used around the world for casting abrasive materials such as concrete (pre-cast concrete, making concrete stamping pads, etc.) and gypsum plasters with high exotherms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- This product has a limited shelf life and should be used as soon as possible. Materials should be stored and used at room temperature (73°F\/23°C). Humidity should be low. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is a fast drying sealer suitable for sealing porous surfaces without interfering with surface detail. You can also use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNon-Porous Surfaces\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is drastically reduced after opening. Immediately replacing the lids on containers after dispensing product will prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: Pre Mix the Part B before using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the required amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(24 lbs.\/11 kgs. or more) at one time, we suggest using a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact SmoothOn or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- Allow the mold to cure (at least 48 hours) at room temperature (73°F\/23°C) before demolding. Do not cure rubber in temperatures less than 65°F\/18°C. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003egypsum plaster materials,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esponge the mold with a soap solution for better plaster flow and easy release.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1.25 Quart","offer_id":53210892140844,"sku":"117418","price":69.99,"currency_code":"CAD","in_stock":true},{"title":"3 Gal","offer_id":53210892173612,"sku":"117419","price":391.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/pmc-780-wet.jpg?v=1778712050"},{"product_id":"smooth-on-smooth-cast-onyx-fast-2-pint-kit","title":"Smooth-On Smooth-Cast ONYX FAST","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth-Cast™ ONYX™\u003c\/strong\u003e is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eONYX™\u003c\/strong\u003e resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eONYX™\u003c\/strong\u003e resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins.\u003cstrong\u003eONYX™ FAST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eresin has a pot life of 2.5 minutes and a cure time of 10-15 minutes. \u003cstrong\u003eONYX™ FAST\u003c\/strong\u003e is a good choice for creating fast cold cast bronze, brass, copper, nickel\/silver, etc. effects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-black and darker than competitive black resins.\u003c\/li\u003e\n\u003cli\u003eCan be polished and buffed to a high gloss shine.\u003c\/li\u003e\n\u003cli\u003eHigher heat resistance vs. competitive black resins.\u003c\/li\u003e\n\u003cli\u003eDoes not contain mercury.\u003c\/li\u003e\n\u003cli\u003eLess expensive vs. other black resins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAll liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Water based clays are not recommended. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F\/23°C). This material has a limited shelf life and should be used as soon as possible. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA release agent is necessary to facilitate demolding when applying into or over most surfaces. Use Mann’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release 200\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhich will release both urethanes and silicones. A liberal coat of release agent should be applied onto all surfaces that will contact the plastic. IMPORTANT: To ensure thorough coverage, apply release and brush with a soft brush over all surfaces. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePre-mix Part-A and Part-B thoroughly before you begin.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter pre-mixing both parts, dispense required amounts of Parts A and B into mixing container and mix thoroughly. Stir for at least 60 seconds, making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. This will help minimize air entrapment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring - Important:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eUse this product with at least room size ventilation or in proximity to a forced outlet air vent and do not inhale\/breath fumes. Fumes, which may be visible with a significant mass concentration, will quickly dissipate with adequate ventilation. Castings with significant mass may be hot to the touch and irritate skin immediately following cure. Let casting cool to room temperature before handling.\u003c\/p\u003e\n\u003cp\u003eDemold time is directly proportional to mass and mold configuration. Larger castings will cure quicker than smaller or thin walled castings. Cure can be accelerated by adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Cure™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecure accelerator (from Smooth-On) or applying mild heat (150°F\/65°C).\u003c\/p\u003e\n\u003cp\u003eIf making rotational or hollow castings, backfilling with a rigid foam (\u003cstrong\u003eFoam-iT!™ 5\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eor other) will provide lightweight reinforcement. Foam backfilling is recommended if castings will be subjected to temperatures above 85°F \/ 30°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlthough not necessary, post curing will increase physical properties, material performance and heat resistance to 250°F\/121°C. After curing at room temperature for 1 hour, expose material in the mold to 250°F\/121°C for 4–6 hours. Let cool to room temperature before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCured castings are hard and durable. They resist moisture, moderate heat, solvents, dilute acids and can be machined, primed and painted or bonded to other surfaces (any release agent must be removed). If machining castings, wear dust mask or other apparatus to prevent inhalation of residual particles. Castings can be displayed outdoors after priming and painting. Unpainted castings may be affected by UV light. Because no two applications are the same, a small test application to determine suitability is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53210248511788,"sku":"117477","price":43.99,"currency_code":"CAD","in_stock":true},{"title":"1 Gal","offer_id":53210248544556,"sku":"120636","price":275.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-cast-fast.jpg?v=1778695014"},{"product_id":"ace-detail-sand-mouse-kit-2167427","title":"Ace Detail Sanding Kit 2167427","description":"\u003cp\u003e\u003cspan\u003eThe Ace Detail Sander is made from a rubber polymer base that can withstand almost any abuse you give it. Engineered to provide the best results in the shortest amount of time. It's great for sanding flat surfaces as well as hard-to-reach areas. No more knuckle busting. No more sore hands and fingers. No more wasting time. With the quick change hook and loop system, paper changes are fast and easy. Put this tool in your toolbox today and find out just how much easier those sanding projects become.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"list\"\u003e\n\u003ci class=\"fas fa-circle disc-bullet\"\u003e\u003c\/i\u003e- Comfortable palm-shaped handle fits snugly in your hand.\u003c\/div\u003e\n\u003cdiv class=\"list\"\u003e\n\u003ci class=\"fas fa-circle disc-bullet\"\u003e\u003c\/i\u003e- High density foam provides a cushioned sanding surface, saving your hands.\u003c\/div\u003e\n\u003cdiv class=\"list\"\u003e\n\u003ci class=\"fas fa-circle disc-bullet\"\u003e\u003c\/i\u003e- Kit includes 4 each of 50, 80, and 120 grit refill sanding sheets.\u003c\/div\u003e\n\u003cdiv class=\"list\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cul\u003e\n\u003cli\u003eBrand Name: Ace\u003c\/li\u003e\n\u003cli\u003eProduct Type:\u003cspan\u003e \u003c\/span\u003eSanding Block\u003c\/li\u003e\n\u003cli\u003eBlock Material:\u003cspan\u003e \u003c\/span\u003ePoly Foam\u003c\/li\u003e\n\u003cli\u003eBrand Name:\u003cspan\u003e \u003c\/span\u003eACE\u003c\/li\u003e\n\u003cli\u003eColor:\u003cspan\u003e \u003c\/span\u003eYellow\u003c\/li\u003e\n\u003cli\u003eGrit Type:\u003cspan\u003e \u003c\/span\u003eAssorted\u003c\/li\u003e\n\u003cli\u003eLength:\u003cspan\u003e \u003c\/span\u003e5 inch\u003c\/li\u003e\n\u003cli\u003eNumber in Package:\u003cspan\u003e \u003c\/span\u003e1 pack\u003c\/li\u003e\n\u003cli\u003eWet or Dry:\u003cspan\u003e \u003c\/span\u003eDry\u003c\/li\u003e\n\u003cli\u003eWidth:\u003cspan\u003e \u003c\/span\u003e3-1\/2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ACE Hardware","offers":[{"title":"Default Title","offer_id":46712286150956,"sku":"118024","price":21.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/AceDetailSandingKit2167427.png?v=1748371261"},{"product_id":"smooth-on-flex-foam-it-5-soft","title":"Smooth-On FlexFoam-iT! Series","description":"\u003cp\u003e\u003cstrong\u003eFlexFoam-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art \u0026amp; crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIGNITE™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants can be added for color effects.\u003c\/p\u003e\n\u003cp\u003ePart A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStore and use at room temperature (73°F\/23°C). Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying Release Agent\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eUrethane foams are adhesive and will stick \/ bond to many surfaces. We recommend\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto release urethane foam from most surfaces. If the release application is particularly difficult (example; releasing urethane foam from urethane rubber), we recommend an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollowed by an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWARNING:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eby itself, or any other silicone based release agents. This will collapse the foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces. Let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT® Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePre-mix Parts A \u0026amp; B\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e– Stir or shake both Part A \u0026amp; Part B thoroughly before dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e– Stop!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKnow the mix ratio of the foam product you are using. Some are by weight and some are by volume. Dispense the correct amounts of Part A and Part B into a large mixing container.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFor Best Results\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Pre-Mix Part B after measuring out material\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– although not necessary, pre-mixing Part B using a drill and mechanical mixer (such as a turbine mixer available from Smooth-On) after measuring out and before combining with Part A will yield best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFor Best Results\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Use a Mechanical Mixer\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Mix for 30 seconds and pour into mold or form.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing by Hand\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e– Stir quickly and deliberately for 30 seconds. Make sure that you aggressively scrape the sides and bottom of your mixing container several times. Pour into mold or form.\u003c\/p\u003e\n\u003cp\u003eBe careful not to splash low-viscosity liquid out of container. Remember, these materials cure quickly. Do not delay between mixing and pouring.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring \u0026amp; Curing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. Allow space in the containment field for the foam to grow as it expands to its ultimate volume. Allow foam to cure for at least 30 minutes before handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMass Concentration \/ Mold Configuration\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e–\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePouring large amounts at a time in certain mold configurations (i.e. cylinder) could cause excess heat to be generated and result in splitting (fissures). Step pouring in layers may resolve this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eImproving Surface Finish \u0026amp; Minimizing Voids With Back Pressure\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCapping the mold cavity opening with a board that has predrilled holes will improve surface finish for some foams. For more information, watch the video at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/backpressure\"\u003esmooth-on.com\/backpressure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIs Your Foam Collapsing?\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- This is a common phenomenon associated with cold temperatures, inadequate mixing or both.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEnvironment or material too cold?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWarm it up.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eInadequate mixing?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou must thoroughly pre-mix both parts A and B. After combining A and B, mix thoroughly. If using a mechanical mixer, mix for 30 seconds. When hand mixing, mix quickly and aggressively, almost whipping the material.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"III \/ 2 Pint","offer_id":53226024960300,"sku":"121210","price":54.99,"currency_code":"CAD","in_stock":false},{"title":"III \/ 1.25 Pint","offer_id":52870819709228,"sku":"115643","price":58.99,"currency_code":"CAD","in_stock":true},{"title":"III \/ 3 Gallon","offer_id":52870819676460,"sku":"115644","price":290.99,"currency_code":"CAD","in_stock":false},{"title":"IV Tuff Stuff \/ 2 Pint","offer_id":52870819807532,"sku":"123580","price":35.99,"currency_code":"CAD","in_stock":true},{"title":"IV Tuff Stuff \/ 2 Gallon","offer_id":52870819774764,"sku":"123993","price":197.99,"currency_code":"CAD","in_stock":false},{"title":"V \/ 2 Pint","offer_id":52870819610924,"sku":"119140","price":36.29,"currency_code":"CAD","in_stock":true},{"title":"6 Pillow Soft \/ 2 Pint","offer_id":52870819873068,"sku":"119142","price":28.99,"currency_code":"CAD","in_stock":false},{"title":"6 Pillow Soft \/ 2 Gallon","offer_id":52870819840300,"sku":"123516","price":204.99,"currency_code":"CAD","in_stock":false},{"title":"VIII Pillow Soft \/ 2 Pint","offer_id":52870819905836,"sku":"119141","price":62.49,"currency_code":"CAD","in_stock":true},{"title":"X \/ 2 Pint","offer_id":52870819971372,"sku":"119139","price":39.99,"currency_code":"CAD","in_stock":true},{"title":"X \/ 2 Gallon","offer_id":52870819938604,"sku":"126052","price":199.99,"currency_code":"CAD","in_stock":false},{"title":"14lb \/ 2 Pint","offer_id":52870820069676,"sku":"119143","price":33.99,"currency_code":"CAD","in_stock":true},{"title":"14lb \/ 3 Gallon","offer_id":52870820036908,"sku":"02122024","price":271.99,"currency_code":"CAD","in_stock":true},{"title":"15 Tuff Stuff SLOW \/ 1.25 Quart","offer_id":52870820135212,"sku":"124167","price":61.99,"currency_code":"CAD","in_stock":false},{"title":"15 Tuff Stuff SLOW \/ 3 Gallon","offer_id":52870820102444,"sku":"042720231","price":259.99,"currency_code":"CAD","in_stock":true},{"title":"17 \/ 1.25 Quart","offer_id":52870820167980,"sku":"119144","price":58.99,"currency_code":"CAD","in_stock":false},{"title":"25 \/ 1.25 Quart","offer_id":52870820233516,"sku":"115562","price":53.99,"currency_code":"CAD","in_stock":false},{"title":"25 \/ 3 Gallon","offer_id":52870820200748,"sku":"115563","price":331.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-flex-it.png?v=1779215566"},{"product_id":"smooth-on-pmc-790-90a","title":"Smooth-On PMC-790 - 1.25 Quart","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-790\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis a Shore 90A industrial urethane rubber compound designed to meet the most stringent requirements of industrial production applications. It is a very hard rubber that offers superior tear and tensile strength as well as impact and abrasion resistance. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-790\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis suitable for a variety of industrial applications including making concrete stamping pads, mold liners and molds for casting concrete.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-790\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis also good for making ball mill liners, industrial rollers and belts, rubber mechanical parts and for bonding itself or other substrates to metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Store and use at room temperature (73°F\/23°C). Material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite Wax™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is suitable for sealing porous surfaces. Apply two thin layers of wax and let dry. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNon-Porous Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is drastically reduced after opening. Immediately replacing the lids on both containers after dispensing product will prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing proper amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(24 lbs.\/10.88 kgs. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in your the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- Allow rubber to cure for at least 48 hours at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor. Prior to casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003egypsum plaster materials,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esponge the mold with a soap solution for better plaster flow and easy release.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance \u0026amp; Storage\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712322097452,"sku":"118859","price":67.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-pmc-790.png?v=1781644418"},{"product_id":"smooth-on-simpact-60a-urethane","title":"Smooth-On Simpact 60A Urethane","description":"\u003cp\u003e\u003cstrong\u003eSimpact™ 60A\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™ urethanes are phthalate free, mercury free and MOCA free\u003c\/strong\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes pour easily.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWorking time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCured rubber has exceptional performance characteristics and dimensional stability.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes can be colored with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIgnite™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes are suitable for making impact resistant props, prototypes and display pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis material may congeal if exposed to cold temperatures. To reconstitute, Part A \u0026amp; B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eThese products have a limited shelf life and should be used as soon as possible. This material should be stored and used at room temperature (73°F\/23°C). This material is moisture sensitive, so relative humidity should be below 50%. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Room size ventilation is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor Mann’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On or your Smooth-On distributor). A liberal coat of release agent should be applied onto all surfaces that will contact the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, apply release and brush with a soft brush over all surfaces. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003eSmooth-On silicone rubber molds usually do not require a release agent unless casting silicone into the mold. Applying a release agent will prolong the life of the mold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSelecting A Mold Rubber\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePour into a urethane rubber mold (release agent required) or a silicone rubber mold. To prevent cure inhibition, post-cure newly made tin silicone molds for 8 hours at 60°C\/150°F and let cool prior to casting. If you are unsure about surface compatibility, a trial casting should be made.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eand will absorb atmospheric moisture resulting in bubbles in the cured rubber. Mixing tools and containers should be clean and made of metal or plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life of product is drastically reduced after opening.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eImmediately replacing the lids on the containers after dispensing product will prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: Pre Mix the Part B before using every time.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHand Mixing\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter weighing and dispensing the required amounts of Parts A and B into mixing container, mix thoroughly for at least 60 seconds making sure that you scrape the sides and bottom of the mixing container several times. Pour entire quantity into a new, clean mixing container and mix again as directed above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMechanical Mixing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edrill mix using a Turbine mixer or equal for 30 seconds followed by careful hand mixing for 30 seconds as directed above. Then, pour entire quantity into a new, clean mixing container and repeat mixing procedure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eBe Aware\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ematerial pot life is 4 minutes at 73°F\/23°C. Pot life at elevated temperatures will be less. Do not delay between mixing and pouring.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles when cured, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level A uniform flow will help minimize entrapped air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAllow casting to cure for at least 2 hours at room temperature (73°F\/23°C) before demolding. Do not cure rubber in temperatures less than 65°F\/18°C. This material will reach full cure in 48 hours at 73°F\/23°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHeat Curing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllow casting to cure for 24 hours at room temperature (73°F\/23°C). Heat cure casting at 140°F\/60°C for 6 hours. Allow casting to cool to room temperature before handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance \u0026amp; Storage\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53334765109548,"sku":"118860","price":40.99,"currency_code":"CAD","in_stock":false},{"title":"2 Gallon","offer_id":53334765142316,"sku":"120331","price":228.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/simpact.png?v=1781643404"},{"product_id":"smooth-on-reoflex-30","title":"Smooth-On ReoFlex","description":"\u003cp\u003e\u003cstrong\u003eReoFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane rubbers offer superior physical and performance properties for production casting of wax, plasters, and resins.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eReoFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes are available in 20A, 30A, 40A, 50A and 60A Shore hardnesses and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReoFlex™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003erubbers cure with negligible shrinkage to a durable rubber that will last in production.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReoFlex™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e“Wet” rubbers will shrink somewhat over time vs. “Dry” formulations.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReoFlex™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003emold rubbers are used for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. Vibrant colors can be achieved by adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSo-Strong™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eColor Tints, available from Smooth-On.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCasting Concrete?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLook into the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseries of urethane mold rubbers.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eurethanes were formulated specifically for casting concrete \/ pigmented concrete and feature Smooth-On’s exclusive ‘V-Polymer™’ technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStore and use at room temperature (73°F\/23°C). Environmental humidity should be as low as possible. Good ventilation (room size) is necessary. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSome Materials Must Be Sealed\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is a fast drying sealer suitable for sealing porous surfaces without interfering with surface detail.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor shellac is suitable for rough contours. A high quality shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA. In all cases, the sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNon-Porous Surfaces\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMetal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePre Mix the Part B before using. After dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cem\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e(16 lbs.\/7 kgs. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in your the cured rubber, vacuum degassing prior to pouring rubber will further reduce entrapped air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor best results,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003epour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllow rubber to cure overnight (at least 16 hours) at room temperature (73°F\/23°C) before demolding. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOptional: Following an overnight cure, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eUsing The Mold\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for wax, liquid rubber or thermosetting materials (i.e. SmoothOn liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor. Prior to casting gypsum plaster materials, sponge the mold with a soap solution for better plaster flow and easy release.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance \u0026amp; Storage\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"20A \/ 1 Gallon","offer_id":52870759678252,"sku":"118278","price":150.99,"currency_code":"CAD","in_stock":false},{"title":"30A \/ 2 Pint","offer_id":52870759645484,"sku":"118873","price":32.99,"currency_code":"CAD","in_stock":false},{"title":"40A \/ 2 Pint","offer_id":52870759711020,"sku":"116169","price":40.99,"currency_code":"CAD","in_stock":false},{"title":"40A \/ 2 Gallon","offer_id":52870759743788,"sku":"115957","price":150.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/reoflex.png?v=1781218399"},{"product_id":"smooth-on-simpact-85a","title":"Smooth-On Simpact 85A - 2 Pint","description":"\u003cp\u003e\u003cstrong\u003eSimpact™ 85A\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSimpact™ urethanes are phthalate free, mercury free and MOCA free.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes pour easily.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWorking time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCured rubber has exceptional performance characteristics and dimensional stability.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes can be colored with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIgnite™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSimpact™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes are suitable for making impact resistant props, prototypes and display pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis material may congeal if exposed to cold temperatures. To reconstitute, Part A \u0026amp; B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThese products have a limited shelf life and should be used as soon as possible. This material should be stored and used at room temperature (73°F\/23°C). This material is moisture sensitive, so relative humidity should be below 50%. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Room size ventilation is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor Mann’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On or your Smooth-On distributor). A liberal coat of release agent should be applied onto all surfaces that will contact the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, apply release and brush with a soft brush over all surfaces. Follow with a light mist coating and let the release agent dry for 30 minutes. Smooth-On silicone rubber molds usually do not require a release agent unless casting silicone into the mold. Applying a release agent will prolong the life of the mold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSelecting A Mold Rubber\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePour into a urethane rubber mold (release agent required) or a silicone rubber mold. To prevent cure inhibition, post-cure newly made tin silicone molds for 8 hours at 60°C\/150°F and let cool prior to casting. If you are unsure about surface compatibility, a trial casting should be made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid urethanes are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emoisture sensitive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand will absorb atmospheric moisture resulting in bubbles in the cured rubber. Mixing tools and containers should be clean and made of metal or plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life of product is drastically reduced after opening.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImmediately replacing the lids on the containers after dispensing product will prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT® Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will prolong the shelf life of unused liquid urethane products. IMPORTANT: Pre Mix the Part B before using every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHand Mixing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter weighing and dispensing the required amounts of Parts A and B into mixing container, mix thoroughly for at least 60 seconds making sure that you scrape the sides and bottom of the mixing container several times. Pour entire quantity into a new, clean mixing container and mix again as directed above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMechanical Mixing\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edrill mix using a Turbine mixer or equal for 30 seconds followed by careful hand mixing for 30 seconds as directed above. Then, pour entire quantity into a new, clean mixing container and repeat mixing procedure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eBe Aware\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ematerial pot life is 4 minutes at 73°F\/23°C. Pot life at elevated temperatures will be less. Do not delay between mixing and pouring.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles when cured, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact Smooth-On or your distributor for information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA uniform flow will help minimize entrapped air\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllow casting to cure for at least 2 hours at room temperature (73°F\/23°C) before demolding. Do not cure rubber in temperatures less than 65°F\/18°C. This material will reach full cure in 48 hours at 73°F\/23°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHeat Curing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllow casting to cure for 24 hours at room temperature (73°F\/23°C). Heat cure casting at 140°F\/60°C for 6 hours. Allow casting to cool to room temperature before handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance \u0026amp; Storage\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712355520812,"sku":"119038","price":39.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/simpact-85a-combo-533x400.jpg?v=1728666336"},{"product_id":"smooth-on-foam-it-5-lb-hard-2-pint-kit","title":"Smooth-On FOAM-iT! 5","description":"\u003cp\u003eSmooth-On’s\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eFOAM-iT!™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSeries are two-component water blown rigid foams that are versatile and easy to use.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproducts are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproduct you are using) and develop a uniform cell structure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-IT!™ 5\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis tack-free in about 4 - 6.5 minutes, developing handling strength in 20 minutes and full cure in 2 hours.\u003c\/p\u003e\n\u003cp\u003eAll\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eproducts can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSO-Strong™\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUVO™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIGNITE™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecolorants and are used for a variety of art\/ craft, industrial design and special effects applications.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eStore and use at room temperature (73°F\/23°C). Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eXTEND-IT™ Dry Gas Blanket\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A RELEASE AGENT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eUrethane foams are adhesive and will stick \/ bond to many surfaces. We recommend\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto release urethane foam from most surfaces. If the release application is particularly difficult (example; releasing urethane foam from urethane rubber), we recommend an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efollowed by an application of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not use Universal Mold Release by itself, or any other silicone based release agents. This will collapse the foam.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKnow the mix ratio for the FOAM-iT!™ product you are usin\u003c\/strong\u003eg. After dispensing the correct amounts of Parts A and B into mixing container,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emix thoroughly for 45 seconds.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStir quickly making sure that you scrape the sides and bottom of the mixing container several times. Be careful not to splash low viscosity material out of the container.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRemember, foams cure quickly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not delay between mixing and pouring.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u0026amp; Curing -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field and let the mixture seek its level. Allow space in the containment field for the foam to grow as it expands to its ultimate volume. Allow foam to cure for at least 20 minutes before handling (FOAM-iT!™ 10 SLOW - 1 hour). Cure time will be affected by mass and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMass Concentration \/ Mold Configuration –\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePouring large amounts at a time in certain mold configurations (i.e. cylinder) could cause excess heat to be generated and result in splitting (fissures). Step pouring in layers may resolve this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImproving Surface Finish \u0026amp; Minimizing Voids With Back Pressure -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eCapping the mold cavity opening with a board that has predrilled holes will improve surface finish for some foams. For more information, watch the video at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/backpressure\"\u003esmooth-on.com\/backpressure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFully Cured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFOAM-iT!™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam can be sanded, machined, drilled, etc. (wear NIOSH approved respirator). Foam can also be primed and \/ or painted.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"2 Pint","offer_id":53341746200876,"sku":"119138","price":37.99,"currency_code":"CAD","in_stock":false},{"title":"2 Gallon","offer_id":53341746233644,"sku":"122769","price":174.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-foam-it-5.png?v=1781729603"},{"product_id":"foam-pool-noodle-asst-colors","title":"Foam Pool Noodle Assorted Colorus","description":"\u003cp\u003e60IN X 2.5IN\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712425808172,"sku":"120264","price":4.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/pool-noodles.png?v=1747431583"},{"product_id":"eva-40-evazote-foam-black-40in-x-1-4in-x-78in","title":"EVA Evazote Foam Black-40In X 1\/4In X 78In","description":"\u003cp\u003e40IN X 1\/4IN X 78IN\u003c\/p\u003e\n\u003ch3 class=\"large\"\u003e\u003cspan\u003eClosed cell crosslinked ethylene copolymer foam.\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eEvazote\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efoams are tougher and more resilient than Plastazote foams.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEvazote\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efoams are available in:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ea range of densities from 30kg\/m\u003csup\u003e3\u003c\/sup\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ea variety of attractive colours\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003evarious conductive grades\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eEvazote\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efoams are used in a variety of industries including:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003esports\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eleisure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003efootwear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003econstruction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eProducts that use\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eEvazote\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efoams include\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ebeauty products and nail buffers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eprotective padding including knee pads that are durable and resilient under repeated impact\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexpansion joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003egym mats\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eboat fenders\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eindustrial gasket\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712440193324,"sku":"120529","price":128.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/foam-solutions-winnipeg-foam-evazote-cropped_3f0e2617-7df6-4b38-b24f-5df043500412.jpg?v=1742069945"},{"product_id":"hard-lite-eva-foam-smooth-10mm","title":"Hard-Lite Eva Foam Smooth 10mm","description":"\u003cp class=\"MsoNormal\"\u003eQuickly create soft, flexible flooring.\u003c\/p\u003e\n\u003cp style=\"text-indent: -.25in; mso-list: l0 level1 lfo1;\" class=\"MsoListParagraphCxSpFirst\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-ascii-font-family: Aptos; mso-fareast-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e-\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e            \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eUse in day cares, gyms and trade shows.\u003c\/p\u003e\n\u003cp style=\"text-indent: -.25in; mso-list: l0 level1 lfo1;\" class=\"MsoListParagraphCxSpMiddle\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-ascii-font-family: Aptos; mso-fareast-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e-\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e            \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInterlocking foam floor tiles assemble in minutes.\u003c\/p\u003e\n\u003cp style=\"text-indent: -.25in; mso-list: l0 level1 lfo1;\" class=\"MsoListParagraphCxSpMiddle\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-ascii-font-family: Aptos; mso-fareast-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e-\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e            \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eLightweight, durable EVA foam. Waterproof.\u003c\/p\u003e\n\u003cp style=\"text-indent: -.25in; mso-list: l0 level1 lfo1;\" class=\"MsoListParagraphCxSpLast\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-ascii-font-family: Aptos; mso-fareast-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e-\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e            \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eEach tile includes two removable edges.\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712612159788,"sku":"123443","price":64.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/81RR9dgZnyL._AC_SL1500.jpg?v=1726004312"},{"product_id":"eva-foam-bevel-low-4mm-x10mm","title":"EVA Foam Bevel (Low) 4mm X 10mm","description":"\u003cp\u003eEVA Foam Bevel (Low) 4mm X 10mm x METRE\u003c\/p\u003e\n\u003cp\u003eLow profile triangular foam bevels! Made from high-density EVA foam. Great for sharp bevelled detailing on armour and props. Easily taper the ends of filigree detail by slicing diagonally from top to bottom parallel to the surface you are attaching it to!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: 1m x (10mm - 30mm)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712612225324,"sku":"123444","price":10.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/3594_1024x1024_47161ce1-291a-4769-8935-87ddee2368ec.webp?v=1742075010"},{"product_id":"eva-foam-bevel-low-9mm-x-20mm","title":"EVA Foam Bevel (Low) 9mm X 20mm","description":"\u003cp\u003eEVA Foam Bevel (Low) 9mm X 20mm x METRE\u003c\/p\u003e\n\u003cp\u003eLow profile triangular foam bevels! Made from high-density EVA foam. Great for sharp bevelled detailing on armour and props. Easily taper the ends of filigree detail by slicing diagonally from top to bottom parallel to the surface you are attaching it to!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: 1m x (10mm - 30mm)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712612290860,"sku":"123445","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/3594_1024x1024_9f083b67-0271-4047-9fa9-5fc68b36ef06.webp?v=1742075017"},{"product_id":"eva-foam-dowel-15mm","title":"EVA Foam Dowel 15mm x 1M","description":"\u003cp\u003eEVA Foam Dowel 15mm x 1M\u003c\/p\u003e\n\u003cp\u003e1-meter long round foam dowelling, made from high-density EVA foam. Suitable for all your impossible-to-cut round detailing and tubing needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5mm - 10mm are made of Form-Lite EVA.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15mm - 40mm are made from Hard-Lite EVA Foam.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712612454700,"sku":"123449","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/dowels_5-40mm_900x900_600x600_70ef32f1-8433-4504-8aa0-9d9dc385fa65.webp?v=1742223362"},{"product_id":"eva-foam-dowel-25mm","title":"EVA Foam Dowel 25mm x 1M","description":"\u003cp\u003eEVA Foam Dowel 25mm x 1M\u003c\/p\u003e\n\u003cp\u003e1-meter long round foam dowelling, made from high-density EVA foam. Suitable for all your impossible-to-cut round detailing and tubing needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5mm - 10mm are made of Form-Lite EVA.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15mm - 40mm are made from Hard-Lite EVA Foam.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712612716844,"sku":"123450","price":20.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/dowels_5-40mm_900x900_600x600_0c30d798-51aa-416a-80e6-13162fb0a3d2.webp?v=1742223460"},{"product_id":"eva-foam-dowel-40mm","title":"EVA Foam Dowel 40mm x 1M","description":"\u003cp\u003eEVA Foam Dowel 40mm x 1M\u003c\/p\u003e\n\u003cp\u003e1-meter long round foam dowelling, made from high-density EVA foam. Suitable for all your impossible-to-cut round detailing and tubing needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5mm - 10mm are made of Form-Lite EVA.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15mm - 40mm are made from Hard-Lite EVA Foam.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712635392300,"sku":"124016","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/dowels_5-40mm_900x900_600x600_89f9775b-4988-4a36-a1f4-5dd5c9e13c3f.webp?v=1742223479"},{"product_id":"eva-foam-craft-grey-2mm","title":"EVA Foam Form-Lite Craft Grey 2mm","description":"\u003cp\u003e29\" x 78\"\u003c\/p\u003e\n\u003ch4\u003eForm-Lite EVA Foam is our most formable foam yet!\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuper formable EVA foam, heat forms very easily for compound curves and armour.\u003c\/li\u003e\n\u003cli\u003eVery lightweight, Form-Lite is around half the weight of other EVA foams of a similar hardness.\u003c\/li\u003e\n\u003cli\u003eForm-Lite is beginner friendly, cuts and sands like a dream.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow to use:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeat form piece as needed using a heat gun (a hair dryer will not be hot enough!)\u003c\/li\u003e\n\u003cli\u003eGlue with Contact Cement\u003c\/li\u003e\n\u003cli\u003ePrime your finished piece with Flexbond or Plastidip\u003c\/li\u003e\n\u003cli\u003ePaint with flexible paints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Data:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShore Hardness of 45*\u003c\/li\u003e\n\u003cli\u003eHigh Density - 125kg\/m3\u003c\/li\u003e\n\u003cli\u003eLight Grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e*While we do everything we can to keep our products as consistant as possible, the manufacturing process of EVA foam can cause slight variation in the foam. Please allow for a Shore Hardness of +\/-3\u003c\/h6\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712651841836,"sku":"124415","price":4.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/form-lite_grey-09.webp?v=1742075745"},{"product_id":"great-stuff-multipurpose-spray-foam","title":"Great Stuff Multipurpose Black Spray Foam 12oz","description":"\u003cp\u003e12OZ\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpands to fill, seal, and insulate gaps up to 1” (25mm).\u003c\/li\u003e\n\u003cli\u003eSmart Dispenser™ provides precision, control, reusability\u003c\/li\u003e\n\u003cli\u003eMultipurpose interior\/exterior use\u003csup\u003e1\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlack color blends naturally into the surrounding environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eReady-to-use and easy to hide, GREAT STUFF™ Multipurpose Black Insulating Foam Sealant is the jack-of-all-trades solution for discreetly filling unwanted gaps across a wide range of projects, both inside and outside of the home.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ca aria-controls=\"collapseacc1_accor1\" aria-expanded=\"true\" data-target=\"#collapseacc1_accor1\" data-toggle=\"collapse\" class=\"accordion__title\" id=\"headingacc1_accor1\"\u003e\u003c\/a\u003eFeatures \u0026amp; Benefits\n\u003cdiv data-parent=\"#accordion_accor1\" aria-labelledby=\"headingacc1_accor1\" class=\"collapse show\" id=\"collapseacc1_accor1\"\u003e\n\u003cdiv class=\"accordion__content\"\u003e\n\u003cdiv class=\"aem-Grid aem-Grid--12 aem-Grid--default--12\"\u003e\n\u003cdiv class=\"bodyCopyContainer aem-GridColumn aem-GridColumn--default--12\"\u003e\n\u003cdiv id=\"bodycopy\" class=\"bodycopy\"\u003e\n\u003cul\u003e\n\u003cli\u003eMultipurpose interior\/exterior use\u003csup\u003e1\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlack color blends naturally into the surrounding environment\u003c\/li\u003e\n\u003cli\u003eExpands to fills, seals, and insulates gaps up to 1 inch (25mm)\u003c\/li\u003e\n\u003cli\u003eForms a long-lasting, airtight, weather-resistant seal\u003c\/li\u003e\n\u003cli\u003eHelps reduce unwanted noise and vibration\u003c\/li\u003e\n\u003cli\u003eAdheres to wood, metal, masonry, glass and most plastics\u003c\/li\u003e\n\u003cli\u003eTack-free in 5-15 minutes\u003csup\u003e2\u003c\/sup\u003e; trimmable in one hour\u003c\/li\u003e\n\u003cli\u003eAll-direction dispensing.\u003c\/li\u003e\n\u003cli\u003ePaintable, stainable and sandable\u003c\/li\u003e\n\u003cli\u003eUL classified\u003c\/li\u003e\n\u003cli\u003eCCMC 13074-L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csup\u003e1\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eSkin of cured foam can discolor if exposed to natural light. Paint or coat foam for the best results.\u003c\/p\u003e\n\u003cp\u003e\u003csup\u003e2\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e70 ± 5°F and 50 ± 5 % RH, 1-inch bead diameter, 6-inch length. The cure rate is dependent on temperature, humidity, and size of the foam bead.\u003c\/p\u003e\n\u003cp\u003e*Do not expose cured foam to temperatures above 240ºF (116ºC).\u003c\/p\u003e\n\u003cp\u003eNote: Great Stuff™ Insulating Foam Sealants are not for use in aviation, vehicle interior or under hood or food\/beverage contact, or as structural support in marine applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GREAT STUFF","offers":[{"title":"This product retail price includes the Provincial EHF Eco Fee of $0.15","offer_id":46712705417516,"sku":"125250","price":23.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/Screenshot_768.png?v=1746640984"},{"product_id":"eva-foam-bevel-15mm","title":"EVA Foam Bevel 15mm","description":"\u003cp\u003eEVA Foam Bevel 15mm x METRE\u003c\/p\u003e\n\u003cp\u003eEquilateral Triangle foam bevels! Made from high-density EVA foam. Great for sharp bevelled detailing on armour and props. Also makes great edges on thick swords.\u003c\/p\u003e\n\u003cp\u003eEasily taper the ends of filigree detail by slicing diagonally from top to bottom parallel to the surface you are attaching it to!\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712744313132,"sku":"125960","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/Triangle_2048x2048_695x695_6081492b-3c3e-4ca5-8630-c7f2c5d7821a.webp?v=1742075267"},{"product_id":"eva-foam-dowell-10mm","title":"EVA Foam Dowell 10mm x 1M","description":"\u003cp\u003eEVA Foam Dowell 10mm x 1M\u003c\/p\u003e\n\u003cp\u003e1-meter long round foam dowelling, made from high-density EVA foam. Suitable for all your impossible-to-cut round detailing and tubing needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5mm - 10mm are made of Form-Lite EVA.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15mm - 40mm are made from Hard-Lite EVA Foam.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":46712744345900,"sku":"125958","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/dowels_5-40mm_900x900_600x600_8736c323-babf-4f6d-822d-a21a7c0fff7e.webp?v=1742223485"},{"product_id":"smooth-on-clear-flex-50-1-25-quart","title":"Smooth-On Clear Flex 50 - 1.25 Quart","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eClear Flex™ 50\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewill cure at room temperature with negligible shrinkage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCured castings are:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear\u003c\/li\u003e\n\u003cli\u003eFlexible\u003c\/li\u003e\n\u003cli\u003eUV Resistant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVibrant colors and color effects are achieved by adding pigments. Applications include making clear-cut molds, model reproductions, decorative cast pieces, special effects, prototype parts.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eStore and use at room temperature (73°F\/23°C). These products have a limited shelf life and should be used as soon as possible. Environmental humidity should be as low as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wearing a NIOSH approved respirator will minimize inhalation of residual fumes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eTo prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent. The best sealer for sealing porous materials is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Available from Smooth-On). Spray shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Allow sealer to dry thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent (such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSelecting A Mold Rubber\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ePour into a urethane rubber mold (\u003cstrong\u003eVytaflex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane – release agent required), tin cured silicone mold (\u003cstrong\u003eMold Max™ 10, 14NV, 20, 25, 30 or 40\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esilicone) or\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMold Star™ 15, 16 or 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eplatinum cured silicone mold.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50 will not work in a Mold Max™ 10T, 15T or 20T silicone mold.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf using Mold Max silicone;\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto prevent cure inhibition, post-cure newly silicone mold for 8 hours at 60° C \/ 150° F and let cool prior to casting resin. If you are unsure about surface compatibility, a small scale trial casting should be made.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Best Results\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003eBefore Pouring Clear Flex™ Into Mold\u003c\/em\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePre-heat rubber mold at 212°F \/ 100°C for 4 hours. This will minimize chances of fish-eyeing, suck back, corner rounding, large bubbles, etc. in finished casting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eShelf life of product is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003ePre Mix the Part B before using.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBefore you begin, pre-mix Part B thoroughly to re-disperse pigments that may have settled.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eUsing a gram scale,\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edispense required amounts of parts A and B into a mixing container and mix for 3 minutes. Scrape the sides and bottom of the container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e(16 lbs.\/7 kg. or more) at one time, use a mechanical mixer (i.e. turbine mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again. If coloring or filling\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50\u003c\/strong\u003e, add filler or pigment dispersion to Part B and mix thoroughly before adding Part A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaterial is mass sensitive and will exotherm. Large amounts of material cast at one time will generate heat and will shrink in proportion to mass. The more material cast in a large concentration, the higher the shrinkage. Amount and nature of shrinkage will depend on casting thickness and mold configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eVacuuming Material\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e-\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eIf vacuum degassing prior to pouring, your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar \/ 100 KPa). Leave enough room in container for material expansion. Vacuum material until it rises, breaks and falls. Vacuum for 1 minute after material falls.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einto a rubber mold, pour mixture in a single spot at the lowest point of the mold. If encapsulating an object, do not pour the mixture directly over the object. Let the mixture seek its level. A uniform flow will help minimize entrapped air.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Best Results\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e- Best results are obtained using a pressure casting technique. After pouring the mixed compound, the entire casting assembly (mold, dam structure, etc.) is placed in a pressure chamber and subjected to 60 PSI (4.2 kg\/cm2) air pressure for at least two hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Castings will cure faster and achieve maximum physical properties and heat resistance if\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 50\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClear Flex™ 95\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis post cured. Post curing is recommended if castings are thin or low mass concentration. Castings should be post cured in a mold or support structure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Cure Schedule:\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eAllow the material to cure for 6–8 hours at room temperature followed by 16 hours at 150°–160°F (65°–72°C). Allow casting or part to cool to room temperature before demolding.\u003c\/p\u003e\n\u003cp\u003eFor most applications, room temperature curing (73°F\/23°C) for 24–48 hours is adequate. Castings will reach ultimate physical properties at room temperature in 5–7 days. Castings removed from mold before 12 hours may exhibit a tacky surface that can be eliminated by exposing casting to 150°F\/65°C for 4–6 hours. If you are pouring less than 1\/4 in. \/ 0.64 cm of material, the casting should be heat post cured.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e*NOTE: Product Packaging May Vary\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cstrong\u003eCAUTION: \u003c\/strong\u003eNOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712772591916,"sku":"126265","price":116.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-clear-flex.png?v=1778790251"},{"product_id":"ethafoam-180-sheet-white-1-8-lb-1in-x-24in-x-108in","title":"Ethafoam 180 White 1.8lb - Per lnft","description":"\u003cp\u003eEthafoam is non-crosslinked Polyethylene closed cell foam capable of withstanding significant impacts and loadings. It’s light in weight yet strong and resilient. Ideally suited for projects requiring:\u003c\/p\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003eShock absorption\u003c\/li\u003e\n\u003cli\u003eVibration dampening\u003c\/li\u003e\n\u003cli\u003eInsulating\u003c\/li\u003e\n\u003cli\u003eBuoyancy\u003c\/li\u003e\n\u003cli\u003eChemical inertness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eEthafoam 180 is a strong, resilient, medium-density 1.8 pcf (28.8 kg\/m3), closed-cell foam. It is ideally suited as a component material in products requiring a shock-absorbing, vibration-dampening, insulating and\/or buoyancy component, and as a material for dunnage and cushioning components in packaging applications for loadings up to 2.0 psi (13.8 kPa).\u003c\/span\u003e\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"1\" x 24\"","offer_id":52629036564780,"sku":"500120","price":12.49,"currency_code":"CAD","in_stock":true},{"title":"1\" x 48\"","offer_id":52629036663084,"sku":"122565","price":114.99,"currency_code":"CAD","in_stock":false},{"title":"2\" x 24\"","offer_id":52629036630316,"sku":"500121","price":23.49,"currency_code":"CAD","in_stock":true},{"title":"2\" x 48\"","offer_id":52629036695852,"sku":"120021","price":227.99,"currency_code":"CAD","in_stock":false},{"title":"4\" x24\"","offer_id":52629036597548,"sku":"500114","price":43.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/white_plank_3.jpg?v=1741301452"},{"product_id":"smooth-on-pmc-770-70a-3ib-trial-kit","title":"Smooth-On PMC 770","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC™-770\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a Shore 70A addition to our line of industrial liquid rubber products (such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-780\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-790\u003c\/strong\u003e) used for a variety of industrial and casting applications. Mixed two parts A to one part B by weight,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMC™-770\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epours easily and cures at room temperature to a solid Shore 70A rubber that has exceptional performance characteristics and dimensional stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eIt is suitable for production casting of abrasive materials such as concrete (pre-cast concrete, making concrete stamping pads, etc.) and gypsum plasters with high exotherms. It is also suitable for rubber mechanical parts of varying configurations (gaskets, wheels, pullies) as well as ball mill liners and vibration\/shock pads.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- These products have a limited shelf life and should be used as soon as possible. Materials should be stored and used at room temperature (73°F\/23°C). Humidity should be low. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Good ventilation (room size) is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSome Materials Must Be Sealed\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is a fast drying sealer suitable for sealing porous surfaces without interfering with surface detail. You can also use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite™ Wax.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn all cases,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNon-Porous Surfaces\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShelf life of product is drastically reduced after opening. Immediately replacing the lids on containers after dispensing product will prolong the shelf life of the unused product.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eXTEND-IT™ Dry Gas Blanket\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) will significantly prolong the shelf life of unused liquid urethane products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLiquid urethanes are\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emoisture sensitive\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eand will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: Pre Mix the Part B before using.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAfter dispensing the required amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(24 lbs.\/11 kgs. or more) at one time, we suggest using a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free castings. Contact SmoothOn or your distributor for further information about vacuum degassing or pressure casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Allow the mold to cure (at least 16 hours) at room temperature (73°F\/23°C) before demolding. Do not cure rubber in temperatures less than 65°F\/18°C. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKick-It™ Cure Accelerator\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- After rubber has cured at room temperature, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting. The type of release agent to use depends on the material being cast. The proper release agent for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewax, liquid rubber or thermosetting materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(i.e. Smooth-On liquid plastics) is a spray release made specifically for mold making (available from Smooth-On or your distributor). Prior to casting\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003egypsum plaster materials,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esponge the mold with a soap solution for better plaster flow and easy release.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIn \u0026amp; Out™ II Water Based Release Concentrate\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) is recommended for releasing abrasive materials like\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003econcrete.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePerformance \u0026amp; Storage\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it. Contact Smooth-On directly with questions about this material relative to your application.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1.25 Quart","offer_id":53334809182508,"sku":"117409","price":69.99,"currency_code":"CAD","in_stock":false},{"title":"3lb","offer_id":53334809149740,"sku":"08222024","price":84.6,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/pmc-770.png?v=1781644654"},{"product_id":"ethafoam-220-sheet-black-2-2-lb-2-x-48-x-108","title":"Ethafoam 220 Sheet Black 2.2 Lb - 2\" x 48\" x 108\"","description":"\u003cp\u003e\u003cstrong\u003eEthafoam 220 Sheet ONLY\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBlack 2.2 Lb - 2\" x 48\" x 108\"\u003c\/p\u003e","brand":"Go Industrial","offers":[{"title":"Default Title","offer_id":52785225695532,"sku":"123510","price":310.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/Ethafoam220Sheet.png?v=1747431645"},{"product_id":"smooth-on-vytaflex-series-copy","title":"Smooth-On Vytaflex Series","description":"\u003cp\u003eUsing Smooth-On’s exclusive “V-Polymer™” technology,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethane rubbers offer superior physical and performance properties for casting concrete.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eurethanes are available in 10A, 20A, 30A, 40A,  45A, 50A and 60A Shore hardness’s and feature convenient one-to-one by volume mix ratios.\u003c\/p\u003e\n\u003cp\u003eVacuum degassing is not necessary and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003erubbers cure with negligible shrinkage to a durable rubber that will last in production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emold rubbers work especially well for casting pigmented \/ colored concrete. Molds made with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeries urethanes will render accurate and uniform colored castings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR COMMERCIAL\/INDUSTRIAL USE ONLY.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSTART BY PREPARING YOUR MODEL...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Store and use at room temperature (73°F\/23°C). These products have a limited shelf life and should be used as soon as possible. Use in a low humidity environment (below 50% RH). Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Good ventilation (room size) is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSome Materials Must Be Sealed\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Urethanes are adhesive. To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc.) must be sealed prior to applying a release agent.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSuperSeal™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available from Smooth-On) or\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOne Step™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare fast drying sealers suitable for sealing porous surfaces without interfering with surface detail.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSonite Wax™\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eor high-grade shellac is suitable for rough contours. A high quality Shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based). Thermoplastics (polystyrene) must also be sealed with shellac or PVA. In all cases, the sealing agent should be applied and allowed to completely dry prior to applying a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNon-Porous Surfaces\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e- Metal, glass, hard plastics, sulfur free clays, etc. require only a release agent.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (\u003cstrong\u003eUniversal™ Mold Release\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eavailable from Smooth-On). A liberal coat of release agent should be applied onto all surfaces that will contact the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMEASURING \u0026amp; MIXING...\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal or plastic. Materials should be stored and used in a warm environment (73°F\/23°C).\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: Stir Part B thoroughly before dispensing. After dispensing equal amounts of Parts A and B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf Mixing Large Quantities\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(16 lbs.\/7 kgs. or more) at one time, use a mechanical mixer (i.e. Squirrel Mixer or equal) for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again.\u003c\/p\u003e\n\u003cp\u003eAlthough this product is formulated to minimize air bubbles in your the cured rubber, vacuum degassing prior to pouring rubber will further reduce entrapped air.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOURING, CURING \u0026amp; PERFORMANCE...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. A uniform flow will help minimize entrapped air. The liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Allow rubber to cure a minimum of 16 – 24 hours at room temperature (73°F\/23°C) before demolding.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVytaFlex™ 10\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eshould cure for at least 24 hours before demolding. Cure time can be reduced with mild heat or by adding Smooth-On\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKickIt™ Cure Accelerator\u003c\/strong\u003e. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePost Curing\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Optional: Following an overnight cure, heating the rubber to 150°F (65°C) for 4 to 8 hours will increase physical properties and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- If using as a mold material, a release agent should be applied to the mold before each casting.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAquaCon™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIn \u0026amp; Out™ II Concrete Release Concentrate\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(available from Smooth-On) is recommended for releasing concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- Fully cured rubber is tough, durable and will perform if properly used and stored. The physical life of the rubber depends on how you use it.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"10A \/ 2 Pint","offer_id":52870607044908,"sku":"115415","price":34.99,"currency_code":"CAD","in_stock":true},{"title":"10A \/ 2 Gallon","offer_id":52870607077676,"sku":"115416","price":256.99,"currency_code":"CAD","in_stock":false},{"title":"20A \/ 2 Pint","offer_id":52870607143212,"sku":"115418","price":31.99,"currency_code":"CAD","in_stock":true},{"title":"20A \/ 2 Gallon","offer_id":52870607175980,"sku":"115419","price":199.99,"currency_code":"CAD","in_stock":false},{"title":"30A \/ 2 Pint","offer_id":52870607241516,"sku":"115421","price":31.99,"currency_code":"CAD","in_stock":true},{"title":"30A \/ 2 Gallon","offer_id":52870607274284,"sku":"115422","price":172.99,"currency_code":"CAD","in_stock":false},{"title":"40A \/ 2 Pint","offer_id":52870607339820,"sku":"119810","price":31.99,"currency_code":"CAD","in_stock":false},{"title":"40A \/ 2 Gallon","offer_id":52870607372588,"sku":"119811","price":173.99,"currency_code":"CAD","in_stock":true},{"title":"50A \/ 2 Pint","offer_id":52870607438124,"sku":"115427","price":34.99,"currency_code":"CAD","in_stock":true},{"title":"50A \/ 1 Gallon","offer_id":53341956440364,"sku":"115948","price":221.99,"currency_code":"CAD","in_stock":false},{"title":"50A \/ 2 Gallon","offer_id":52870607470892,"sku":"115428","price":189.99,"currency_code":"CAD","in_stock":false},{"title":"60A \/ 2 Pint","offer_id":52870607536428,"sku":"115430","price":33.99,"currency_code":"CAD","in_stock":true},{"title":"60A \/ 2 Gallon","offer_id":52870607569196,"sku":"115431","price":189.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/products\/vytaflex-10-combo-533x400.jpg?v=1692058435"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/collections\/AB-Foam.gif?v=1726170159","url":"https:\/\/goindustrial.com\/fr\/collections\/urethane-foam-rubber-casting.oembed","provider":"Go Industrial","version":"1.0","type":"link"}