{"product_id":"smooth-on-accel-t-accelerator","title":"Smooth-On Accel-T Accelerator","description":"\u003ch3\u003eAccel-T™\u003c\/h3\u003e\n\u003cdiv class=\"info\"\u003e\n\u003cdiv class=\"herothumb\"\u003e\n\u003cspan\u003e*NOTE: Product Packaging May Vary\u003c\/span\u003e\n\u003ch3 class=\"gotodocs\"\u003e\n\u003cstrong class=\"ctaRedChevron\"\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/products\/accel-t\/#reldocs\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAccel‑T™\u003c\/strong\u003e is a one-component additive that will reduce the cure time of Smooth-On tin cure silicone rubber compounds, in proportion to the amount added, from overnight to a few hours.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e is added as a percentage of part B, before adding Part A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eWorking time (pot life) is drastically reduced in proportion to the amount of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e added. The viscosity of the rubber will also increase. Mix, vacuum and pour quickly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"instructions\"\u003e\n\u003ca name=\"instructions\"\u003e\u003c\/a\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: Thoroughly Pre-mix\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith Part B before adding Part A. Adding\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewill reduce the library life of tin-cured silicone rubber in proportion to the amount added.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in a properly ventilated area (\"room size\" ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Store and use all products at room temperature. This product has a limited shelf life and should be used as soon as possible. Wear gloves and eye protection to minimize risk of contamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll components must be measured using an accurate gram scale.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Determine the total amount of rubber required for your application. Calculate the correct amounts of Part A, Part B and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein advance.\u003c\/p\u003e\n\u003cp\u003e2. Weigh out the required amount of Part B\u003c\/p\u003e\n\u003cp\u003e3. Weigh out and add the required amount of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eas a percentage of the Part B. Mix Part B and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethoroughly.\u003c\/p\u003e\n\u003cp\u003e4. Weigh out and add the required amount of Part A.\u003c\/p\u003e\n\u003cp\u003e5. Mix thoroughly, eliminating all color streaks from the mixture.\u003c\/p\u003e\n\u003cp\u003e6. Pour mixture into new, clean mixing container and mix again.\u003c\/p\u003e\n\u003cp\u003e7. Vacuum material (29 h.i.g. mercury) as directed on the silicone rubber technical bulletin.\u003c\/p\u003e\n\u003cp\u003e8. Pour rubber into containment field, let rubber rise over model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWorking time (pot life) is drastically reduced in proportion to the amount of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAccel-T™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eadded. Viscosity of rubber will also increase. Mix, vacuum and pour quickly.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eBrowse \u003ca href=\"\/fr\/collections\/smooth-on\"\u003eSmooth-On mould-making and casting materials\u003c\/a\u003e, or \u003ca href=\"\/fr\/pages\/contact\"\u003eask Go Industrial for product-selection and ordering help\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":46712648106284,"sku":"124329","price":20.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/3426\/4620\/files\/smooth-on-accel-t.png?v=1778783729","url":"https:\/\/goindustrial.com\/fr\/products\/smooth-on-accel-t-accelerator","provider":"Go Industrial","version":"1.0","type":"link"}