Plastics, Acrylic & Polycarbonate Learning Centre
Guides to identifying, selecting, cutting, drilling, bonding, bending and maintaining acrylic, polycarbonate and industrial plastics.
Use these guides to choose the right material, plan the work, avoid common failures and connect practical technique with products available from GoIndustrial.
Learning Centre / Plastics, Acrylic & Polycarbonate
Start here
How to Measure for a Portable AC Acrylic Window Insert
A custom acrylic window insert gives a portable air conditioner exhaust hose a clean, removable connection while preserving daylight. The panel is only as good as the measurements: window tracks, handles, screens, vent adapters and the way the sash…
Read the guideBuilding an Acrylic Aquarium: Design and Fabrication Considerations
A design-first guide to acrylic aquariums covering hydrostatic load, material selection, panel thickness, bracing, solvent cementing, support and staged leak testing.
Read the guideCan You Glue Polyethylene? Adhesives, Preparation and Welding
Yes—polyethylene can be adhesively bonded, but ordinary household glue usually performs poorly. HDPE and LDPE have low-surface-energy, chemically resistant surfaces, so a dependable joint needs a purpose-designed adhesive system, the specified…
Read the guideMore Plastics, Acrylic & Polycarbonate guides
Working with Acrylic Sheet: Cutting, Drilling, Bending and Bonding
Acrylic sheet—PMMA, often called Plexiglas—is clear, lightweight, weather-resistant and highly fabricable. It can be sawn, routed, drilled, cemented, line-bent, thermoformed and polished, but its response to heat, stress and solvents differs from wood,…
Read the guideHow to Source Industrial Plastic Stock for CNC Machine Shops
The fastest plastic-stock quote is the one that defines what the finished component must do. Material family alone—nylon, acetal, UHMW or PEEK—is not enough. Grade, manufacturing method, dimensions, colour, certification and conditioning can change…
Read the guideHow to Drill Acrylic Sheet Without Cracking
A practical guide to drilling acrylic sheet without cracking or chipping, including bit geometry, backing, speed, feed, cooling, edge distance and finishing.
Read the guideFood-Contact Plastic: What “Food Grade” Really Means
A practical guide to food-contact plastics, explaining why the complete finished article, formulation and intended conditions matter—not only the recycling code.
Read the guideHow to Apply Sun-Control Window Film Without Bubbles
A clean installation method for sun-control window film, from glass compatibility and preparation to wet positioning, squeegeeing, trimming and cure.
Read the guideHow to Identify Common Plastic Types
A safe, practical plastic-identification workflow using labels, documentation, physical clues and comparison samples before fabrication, bonding or recycling.
Read the guideHow to Install Multiwall Polycarbonate Roofing and Glazing
A step-by-step installation guide for multiwall polycarbonate roofing and glazing, including framing, cutting, flute sealing, thermal movement and weather detailing.
Read the guideHow to Clean and Polish Acrylic with NOVUS
A step-by-step acrylic-care guide using NOVUS No. 1, No. 2 and No. 3, including scratch assessment, test spots, safe cloths and limits on coated surfaces.
Read the guideMultiwall Polycarbonate Panels: Types, Uses and Selection
A selection guide to multiwall polycarbonate panel thickness, flute structure, light transmission, solar control, framing and accessory compatibility.
Read the guideHow to Cut, Fasten and Fabricate King StarBoard
A practical fabrication guide to cutting, routing, drilling, fastening and supporting King StarBoard marine-grade HDPE sheet.
Read the guideNeed help choosing?
Tell us what you are making, repairing or maintaining. Include the materials, dimensions, service conditions and the result you need.
Shop related productsAsk Technical Solutions