Tech Specs
Enviro Epoxy Metallic Blue Emp500-3 12 OZ
Metallic pigments can be added to Enviro Poxy™ and New Poxy® products to add a shimmering, iridescent finish to your surface.
MIXING & APPLICATION
-
Apply a base coat of solid colour Enviro Epoxy or New Poxy
-
Mix metallic pigment(s) with PART A clear epoxy using a drill mixer 1 day before application
-
Mix until the pigment is dispersed then set aside
-
Do NOT mix PART B until you are ready to apply
-
Once ready to apply, mix PART B into PART A metallic mixture (drill mixer is not required)
-
Wear a N95 respirator and safety goggles
-
Two coat application is recommended
-
Once application is completely dry, a clear top coat is recommended to seal the coating
Additional Information
Instructions
APPLICATION
For optimal results, a two-coat base of epoxy is recommended prior to applying flakes
Broadcast the flakes in an upward motion
Wear spike shoes for an even broadcast and/or to fill in any sparse areas
Scrape off any flakes that are not level with the surface
Muse use a clear coat of epoxy over flakes once application is dry (this is necessary to seal and hold the flakes in place)
Multiple coats of clear epoxy can be applied to achieve a smooth finish
Trending Now