Tech Specs
Rust-Oleum Epoxyshield Garage Floor Coating Kit Tan
Brighten your garage with a clean, glossy, showroom-quality floor. EPOXYSHIELD Garage Floor Coating Kit applies in one easy coat and protects against gasoline, antifreeze, motor oil, salt, hot tire pick-up and cracking—for years to come. EPOXYSHIELD Garage Floor Coating Kit is a 2-part, water-based epoxy that provides an easy-to-clean, showroom quality appearance. Water-based for low odour and easy clean-up, and it’s.
Application Steps
Clean and degrease concrete
Etch the concrete
Mix and pour epoxy
Apply and add chips if desired
Painting Concrete with EpoxyShield
Concrete Paint Tips:
Allow new concrete to cure a minimum of 28 days.
Apply when temperature range is 60 to 85 degrees.
Wait 24 hours after coating for light foot traffic.
Wait 3 days after coating for vehicle traffic.
Conduct a moisture test before applying coating
Apply 2x2 sheet of plastic to concrete taping edges down. Wait 72 hours and check for water droplets or evidence of moisture. Wait 72 hours and test again. If moisture is present, use RockSolid Moisture Stop before floor application.
Mix Part A & B for 3 minutes, and apply within 1-2 hours of mixing
Always read instructions completely before starting any application.
Protects Against:
- Gasoline
- Antifreeze
- Motor Oil
- Salt
- Hot Tire Pick-Up
- Cracking
- Peeling