Wear Circa 1850 Stripping Gloves and protective eye wear. Protect painted areas with polyethylene or foil sheet. If using on a surface other than wood, metal, or concrete, test a small area first. Brush on a liberal amount of Circa 1850 Bio DeGluer. Wait at least 15 minutes for the adhesive to soften or dissolve. Keep the working area completely saturated with Bio DeGluer. If Bio DeGluer dries out, reapply to reactivate. Remove softened adhesive using a scraper. Use Circa 1850 Maple Scraper to avoid gouging wood surfaces. If adhesive is exceptionally thick and some residue remains, repeat the procedure. Remove residue with Circa 1850 Finishing Pads dipped in Bio DeGluer. When all the adhesive has been removed, wash down the surface with mineral spirits, alcohol or water using Circa 1850 Finishing Pad. Allow surface to dry thoroughly prior to covering or applying new adhesive or finish.