Nylatech® MD cast nylon tube in assorted stock sizes
Nylatech® MD cast nylon tube, illustrative stock view
Diagram showing cast nylon tube outside diameter (OD) and inside diameter (ID)
Illustrative bushing machined from Nylatech® MD cast nylon tube
Nylatech® MD cast nylon tube in assorted stock sizes
Nylatech® MD cast nylon tube, illustrative stock view
Diagram showing cast nylon tube outside diameter (OD) and inside diameter (ID)
Illustrative bushing machined from Nylatech® MD cast nylon tube

Product details and technical data

Product information

Nylatech® MD Cast Nylon 6 Tube. Molybdenum-disulfide-modified cast PA6 for machined wear components.

Select your tube size

31" to 40" outside diameter (OD). Select OD, then inside diameter (ID).

Sold each (EA): quantity 1 = one complete tube. Standard length: 26". Length is not a separate option.

Choosing Nylatech® MD

Consider Nylatech® MD when reviewing unfilled nylon for friction and wear requirements. Compare Nylatech® Natural as the unfilled baseline or Nylatech® MD-Oil when internal oil lubrication is also needed.

Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.

Other tube grades: Nylatech® Natural · Nylatech® Natural-Oil · Nylatech® Blue · Nylatech® Oil-Filled · Nylatech® SL · Nylatech® MD-Oil · Nylatech® PVM · Nylatech® Super Black.

Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.

Technical properties and data sheet
Nylatech® MD — typical selection data
Density 1.15 g/cm³
Tensile strength 10,500–12,000 psi
Compressive strength at 10% deflection 15,000 psi
Flexural strength 17,000 psi
Elongation 30–40 %
Hardness 80–82 Shore D
Coefficient of friction (dry against steel) 0.25–0.30 dimensionless
Water absorption, 24 hours 0.5 %

Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech® MD technical data.

Nylatech® MD in other shapes: Sheet · Rod.

Custom sizes and CNC-machined parts

For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.

You may also like

Explore the same grade in other stock shapes, CNC finished parts, and grades to compare for your application.

Aide sur les produits

Vous ne trouvez pas le bon produit?

Nous joindre