Nylatech® MD cast nylon sheet in assorted stock sizes
Nylatech® MD cast nylon sheet, illustrative stock view
Diagram showing cast nylon sheet thickness
Illustrative wear plate machined from Nylatech® MD cast nylon sheet
Nylatech® MD cast nylon sheet in assorted stock sizes
Nylatech® MD cast nylon sheet, illustrative stock view
Diagram showing cast nylon sheet thickness
Illustrative wear plate machined from Nylatech® MD cast nylon sheet

Product details and technical data

Product information

Nylatech® MD Cast Nylon 6 Sheet. Molybdenum-disulfide-modified cast PA6 for machined wear components.

Select thickness and area

Sold per square foot (SFT): quantity 1 = 1 sq ft. Select a 0.25" to 4" thickness. Standard stock is 2' × 4'; one full sheet contains 8 SFT.

For cut pieces, specify length × width and piece count. The SFT quantity alone does not define a cutting layout.

Choosing Nylatech® MD

Consider Nylatech® MD when reviewing unfilled nylon for friction and wear requirements. Compare Nylatech® Natural as the unfilled baseline or Nylatech® MD-Oil when internal oil lubrication is also needed.

Sheet or plate is a starting form for flat wear pads, strips and machined profiles. Plan the part layout and finished thickness before selecting stock.

Other sheet grades: Nylatech® Natural · Nylatech® Natural-Oil · Nylatech® Blue · Nylatech® Oil-Filled · Nylatech® SL · Nylatech® MD-Oil · Nylatech® PVM · Nylatech® Super Black · Nylatech® Food Grade Blue.

Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.

Technical properties and data sheet
Nylatech® MD — typical selection data
Density 1.15 g/cm³
Tensile strength 10,500–12,000 psi
Compressive strength at 10% deflection 15,000 psi
Flexural strength 17,000 psi
Elongation 30–40 %
Hardness 80–82 Shore D
Coefficient of friction (dry against steel) 0.25–0.30 dimensionless
Water absorption, 24 hours 0.5 %

Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech® MD technical data.

Nylatech® MD in other shapes: Rod · Tube (browse OD ranges).

Custom sizes and CNC-machined parts

For 4' × 4', 4' × 8' or 4' × 10' sheets, other nonstandard sizes, or CNC-machined parts, send grade, thickness, dimensions and piece count. Include a drawing and required tolerances for machined parts. Request custom work.

You may also like

Explore the same grade in other stock shapes, CNC finished parts, and grades to compare for your application.

Aide sur les produits

Vous ne trouvez pas le bon produit?

Nous joindre