Nylatech® MD-Oil cast nylon sheet in assorted stock sizes
Nylatech® MD-Oil cast nylon sheet, illustrative stock view
Diagram showing cast nylon sheet thickness
Illustrative wear plate machined from Nylatech® MD-Oil cast nylon sheet
Nylatech® MD-Oil cast nylon sheet in assorted stock sizes
Nylatech® MD-Oil cast nylon sheet, illustrative stock view
Diagram showing cast nylon sheet thickness
Illustrative wear plate machined from Nylatech® MD-Oil cast nylon sheet

Product details and technical data

Product information

Nylatech® MD-Oil Cast Nylon 6 Sheet. Cast PA6 combining moly modification and internal oil lubrication.

Select thickness and area

Sold per square foot (SFT): quantity 1 = 1 sq ft. Select a 0.25" to 4" thickness. Standard stock is 2' × 4'; one full sheet contains 8 SFT.

For cut pieces, specify length × width and piece count. The SFT quantity alone does not define a cutting layout.

Choosing Nylatech® MD-Oil

Consider Nylatech® MD-Oil for loaded parts with slow movement and difficult lubrication access. Compare Nylatech® MD without oil lubrication or Nylatech® Oil-Filled without moly modification.

Sheet or plate is a starting form for flat wear pads, strips and machined profiles. Plan the part layout and finished thickness before selecting stock.

Other sheet grades: Nylatech® Natural · Nylatech® Natural-Oil · Nylatech® Blue · Nylatech® MD · Nylatech® Oil-Filled · Nylatech® SL · Nylatech® PVM · Nylatech® Super Black · Nylatech® Food Grade Blue.

Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.

Technical properties and data sheet
Nylatech® MD-Oil — typical selection data
Density 1.15 g/cm³
Tensile strength 10,000–12,000 psi
Compressive strength at 10% deflection 14,500 psi
Flexural strength 15,000 psi
Elongation 30–45 %
Hardness 80–84 Shore D
Coefficient of friction (dry against steel) 0.13–0.20 dimensionless
Water absorption, 24 hours 0.2–0.5 %

Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech® MD-Oil technical data.

Nylatech® MD-Oil in other shapes: Rod · Tube (browse OD ranges).

Custom sizes and CNC-machined parts

For 4' × 4', 4' × 8' or 4' × 10' sheets, other nonstandard sizes, or CNC-machined parts, send grade, thickness, dimensions and piece count. Include a drawing and required tolerances for machined parts. Request custom work.

You may also like

Explore the same grade in other stock shapes, CNC finished parts, and grades to compare for your application.

Aide sur les produits

Vous ne trouvez pas le bon produit?

Nous joindre