6.25" to 10.5" outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length: 52". Length is not a separate option.
Choosing Nylatech® Natural
A starting point for general wear components. Compare Nylatech® Oil-Filled when internal lubrication is needed, or Nylatech® Blue for heat-stabilized material.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Food contact: The manufacturer reports Nylatech® Natural and Nylatech® Natural-Oil meet 21 CFR 177.1500. Confirm the supplied grade’s declaration for your food-contact conditions; this does not certify the finished part.
Technical properties and data sheet
Nylatech® Natural — typical selection data
Density
1.15 g/cm³
Tensile strength
10,500–12,000 psi
Compressive strength at 10% deflection
15,000 psi
Flexural strength
17,000 psi
Elongation
30–40 %
Hardness
80 Shore D
Coefficient of friction (dry against steel)
0.36–0.42 dimensionless
Water absorption, 24 hours
0.5 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech® Natural technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
You may also like
Explore the same grade in other stock shapes, CNC finished parts, and grades to compare for your application.
Some sizes Custom Order
Custom Order
Custom Order
Custom Order
