Nylatech® Oil-Filled cast nylon tube in assorted stock sizes
Nylatech® Oil-Filled cast nylon tube, illustrative stock view
Diagram showing cast nylon tube outside diameter (OD) and inside diameter (ID)
Illustrative bushing machined from Nylatech® Oil-Filled cast nylon tube
Nylatech® Oil-Filled cast nylon tube in assorted stock sizes
Nylatech® Oil-Filled cast nylon tube, illustrative stock view
Diagram showing cast nylon tube outside diameter (OD) and inside diameter (ID)
Illustrative bushing machined from Nylatech® Oil-Filled cast nylon tube

Product details and technical data

Product information

Nylatech® Oil-Filled Cast Nylon 6 Tube. Oil-lubricated cast PA6 for machined sliding and rotating wear components.

Select your tube size

6.25" to 10.5" outside diameter (OD). Select OD, then inside diameter (ID).

Sold each (EA): quantity 1 = one complete tube. Standard length: 52". Length is not a separate option.

Choosing Nylatech® Oil-Filled

Consider Nylatech® Oil-Filled where regular external lubrication is difficult. Compare Nylatech® MD-Oil for a moly-and-oil formulation, or Nylatech® Natural-Oil when food-contact documentation is required.

Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.

Other tube grades: Nylatech® Natural · Nylatech® Natural-Oil · Nylatech® Blue · Nylatech® MD · Nylatech® SL · Nylatech® MD-Oil · Nylatech® PVM · Nylatech® Super Black.

Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.

Technical properties and data sheet
Nylatech® Oil-Filled — typical selection data
Density 1.14 g/cm³
Tensile strength 10,000 psi
Compressive strength at 10% deflection 14,000–15,000 psi
Flexural strength 13,000 psi
Elongation 35–40 %
Hardness 80 Shore D
Coefficient of friction (dry against steel) 0.17–0.19 dimensionless
Water absorption, 24 hours 0.3 %

Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech® Oil-Filled technical data.

Nylatech® Oil-Filled in other shapes: Sheet · Rod.

Custom sizes and CNC-machined parts

For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.

You may also like

Explore the same grade in other stock shapes, CNC finished parts, and grades to compare for your application.

Aide sur les produits

Vous ne trouvez pas le bon produit?

Nous joindre