Weld-On Plastic Adhesives
High quality adhesives for bonding and welding any plastic.
Acrylics
Clear solvent cements for acrylics. Excellent for cementing letters to sign panels and trim cap. Also styrene, butyrate & polycarbonate.
Vinyls
Multiple solvent cements ranging from optically clear to milky, specifically developed for vinyl, PVC, and CPVC.
ABS
Fast set solvent cements formulated for ABS. Join similar substrates in a range of consistencies
Polycarbonate
Clear, 2-component urethane based adhesives for polycarbonate. Low VOC and high UV resistance.
Also butyrate, ABS, and PETG.
Styrene
Fast set, solvent cement for bonding styrene to itself.
Acrylic
Weld-On #3
Weld-On® 3 is a water-thin, non-flammable cement formulated for clear bond to many thermoplastic substrates, particularly acrylic.
Ideal for cementing acrylic (poly-methyl methacrylate) plastic to itself.
Acrylic & Multi-Purpose
Weld-On #16
Weld-On® 16 is a clear solvent-type acrylic cement with very high strength. The fast curing time means some parts may be handled within a few minutes when applied to cast, molded or extruded acrylics.
Especially formulated to bond acrylic (poly-methyl methacrylate) plastic. Also effective for bonding styrene, butyrate, PVC, ABS and polycarbonate, and porous plastic surfaces.
Acrylic
Weld-On #4
Weld-On® 4 is a water-thin cement formulated to develop clear bond within minutes with a longer time full bond strength than Weld-On 3. It is less likely to leave white marks (commonly called blushing) with significant and increased strength reached over several hours.
A blush-resistant cement for bonding acrylic (poly-methyl methacrylate) to itself.
Polyvinyl Chloride
Weld-On #2007
Weld-On 2007 is a fast drying clear solvent cement. Since it is water thin, it may be applied by brush, syringe, spray and most other methods to fuse the two surfaces in contact.
Specifically developed for bonding rigid vinyl and foamed PVC to themselves and each other.
Multi-purpose
Weld-On #4052
Weld-On® 4052 is a fast set solvent cement. The cement appears to have a slight amber tint when viewed in the container. However, when used as recommended in a thin layer, seam between substrates appears clear when dry.
Exceptional bonding between a variety of plastic substrates including PVC, CPVC, foamed PVC, ABS, acrylic, styrene, polycarbonate, and more.
ABS & Styrene
Weld-On #2354
Weld-On® 2354 is a fast drying clear solvent cement. Because it is water thin, it can be applied by brush, syringe, spray, etc. Sufficient strength in a few minutes.
Exceptional at bonding like to like ABS, styrene, acrylics and polycarbonates to themselves. Do not use with dissimilar materials such as: ABS to styrene, etc.
Practical applications of Weld-On
Used to weld bond high impact styrene for modeling:
