Snaptite is a two part Polycarbonate glazing system designed to install Multiwall Polycarbonate Sheets with thicknesses between 8 mm to 10 mm. Install and fasten the "Base" profile along the rafters with a down slope of 2 inches for every 12 inches of run, lay the multiwall sheet between the "Base" profile and then snap the "Retainer" Profile into the "Base" profile securely clamping the Multiwall Sheet on either side of the Snaptite Profile. The Snaptite Profile will provide a water tight joint when installed in an application providing a 2/12 slope.
Available in clear lengths of 8, 10, 12, 14, 24 ft.
Idea for use with our 8 mm Multiwall polycarbonate sheet.
