DIRECTIONS: 1. Surfaces must be flat, dry and free of dirt, grease, and oil. Clean using isopropyl alcohol. Dry thoroughly. 2. Cut tape to desired length and round corners. 3. Remove liner and apply to surface starting at the center and moving toward the edges. IMPORTANT: Apply when temperature is above 39° F. In-use temperature range: -40° F to 220° F. Prime and seal all wood and concrete before use. Not recommended for areas with continuous water submersion such as pools, tubs, and spas. Avoid placing Tread Tape in grout lines, cracks or to bridge gaps. * This product has not been endorsed by OSHA or ADA.