Tech Specs
Product information
Gelcoat White Waxed - 22 Kg (18.9L)
Requires M.E.K.P Catalyst for Curing.
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
|---|---|---|---|---|
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | --- |
| 15 ml per litre or 15 drops per oz. | --- | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | --- | --- | 40 min. | 2 hr. |
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.