Tech Specs
Product information
MagicEzy Hairline Fix seals and colors stress cracks… FAST. The structural grade adhesion helps prevent cracks from spreading. Available in 11 colors. Repairs guaranteed for 3 years. Size: 12.9mL / 0.43 fl OZ resealable tube.
- Repairs very fine cracks and scratches
- Easy to use, one-part solution
- Helps prevent cracks from spreading
- Available in 11 colors
- 3 year repair guarantee
- 30 day money-back satisfaction guarantee
- Fiberglass / Gelcoat – Boats, jet skis, kayaks, RVs
- Ceramics & Stone – Tiles, bench tops, vanities
- Showers, baths, basins & vanities
- Most plastics* – Canoes, kayaks, dinghies
- Aluminum and metal* – Boats, cars, appliances
- 9 Second Chip Fix repairs for a gloss finish
*For plastic or aluminium surfaces, prepare the surface using MagicEzy Mega Fusion first.
Additional Information
Video
SDS
Instructions
1. Prepare
- Do not use below 10°C / 50°F
- Suitable for above the waterline use.
- Scrape a pin point along crack to remove grime and dirt.
- Wash/scrub soapy water into damage then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
- Rotate/shake the tube for 30 seconds for even consistency.
Color match?
Mix two or more colors on a clear plastic wrap. View new color when placed over the surface.
2. Apply
- For plastic or aluminum surfaces apply a thin coat of MagicEzy MegaFusion Primer / Sealant and allow 2 hours to cure (at 70ºF/20º C).
- Have a tissue ready in your spare hand.
- APPLY a drop on the damage.
How do I apply on vertical surfaces?
To prevent slumping or for a fast dry use a hairdryer for 3 minutes to form a skin.
3. Level
- Rapidly wipe the ‘LEVEL’ across the repair 5 times. FAST wipes help Hairline Fix penetrate deeply inside the damage.
- Clean the ‘LEVEL’ with the tissue and TRIM off surface smears.
- Some deep cracks may require several coats to fill completely. Allow at least 2 hours in between coats before re-applying (overnight is best).
How do I apply in hot/cold weather?
In temperatures above 90ºF (30ºC) lay a damp towel over the area until hand temperature is reached. Below 55ºF/15ºC set with hairdryer for 3 minutes.
4. Trim
- TRIM to remove smears off the repair edge (but not the repair itself). Dampen or use a tissue to help clean-up if necessary.
DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY: 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days.