1. Prepare

• Do not use below 10°C / 50°F
• Suitable for above the waterline use.
• Scrape a pin point along crack to remove grime and dirt.
• Wash/scrub soapy water into damage then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
• Rotate/shake the tube for 30 seconds for even consistency.

2. Apply

• For plastic or aluminum surfaces apply a thin coat of MagicEzy MegaFusion Primer / Sealant and allow 2 hours to cure (at 70ºF/20º C).
• Have a tissue ready in your spare hand.
• APPLY a drop on the damage.

3. Level

• Rapidly wipe the ‘LEVEL’ across the repair 5 times. FAST wipes help Hairline Fix penetrate deeply inside the damage.
• Clean the ‘LEVEL’ with the tissue and TRIM off surface smears.
• Some deep cracks may require several coats to fill completely. Allow at least 2 hours in between coats before re-applying (overnight is best).

4. Trim

• TRIM to remove smears off the repair edge (but not the repair itself). Dampen or use a tissue to help clean-up if necessary.

DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY: 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days.