Gelcoat White Unwaxed - 22kg (18.9L)
Full Product Details
Gelcoat White Unwaxed - 22kg (18.9L)
Requires M.E.K.P Catalyst for Curing.
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
|---|---|---|---|---|
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | --- |
| 15 ml per litre or 15 drops per oz. | --- | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | --- | --- | 40 min. | 2 hr. |
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.
Pickup available at Kelowna, BC
Usually ready in 2-4 days
Tech Specs
Product information
SDS
Gelcoat White Unwaxed - 22kg (18.9L)
Requires M.E.K.P Catalyst for Curing.
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
|---|---|---|---|---|
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | --- |
| 15 ml per litre or 15 drops per oz. | --- | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | --- | --- | 40 min. | 2 hr. |
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.