Tech Specs

MagicEzy 9 Second Chip Fix™ is a revolutionary nano filler that repairs and colors cavities Fast. It’s one-part formula and built-in leveler make it super easy to use. Available in 11 colors. Repairs guaranteed for 3 years. Size: 12.9mL / 0.43 fl OZ resealable tube.

Features:

  • Easy to use, one-part solution
  • No sanding. No mixing. No Odor.
  • Available in 11 colors
  • Can be sanded and drilled
  • 30 day money-back satisfaction guarantee
  • Repairs guaranteed for 3 years

Use on:

  • Fiberglass / Gelcoat – Boats, jet skis, kayaks, RVs
  • Ceramics & Stone – Tiles, bench tops, vanities
  • Showers, baths, basins & vanities
  • Most plastics* – Canoes, kayaks, dinghies
  • Aluminum and metal* – Boats, cars, appliances
  • Wood

*For plastic or aluminum surfaces, prepare the surface using MagicEzy Mega Fusion first.

Tips:

  • Suitable for above the waterline use.
  • Before using, massage the tube well (30 seconds) for even consistency.
  • For deep damage, apply in ¼ inch (6mm) layers. Allow each layer to DRY for 2 hours at 70ºF/20ºC before applying the next one.
  • If a high gloss finish is required, use a top coat of MagicEzy Hairline Fix.

Cure Time:

DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30 minutes cool down. NORMAL DRY 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days. A second application of 9 Second Chip Fix may be required.

Storage:

Store in a cool place below 50°F / 10°C. (A refrigerator is best.)

How to Apply:

Do not use below 50°F/ 10°C.

magicezy-repair-steps

Additional Information

Video



SDS
Instructions

ApplyLevelTrimPrepare

1. Prepare

  • Do not use below 10°C / 50°F
  • Suitable for above the waterline use.
  • Wash/scrub with soapy water into damage then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
  • Rotate/shake the tube for 30 seconds for even consistency.

Color match?

Mix two or more colors on a clear plastic wrap. View new color when placed over the surface.

2. Apply

  • For plastic or aluminum surfaces apply a thin coat of MagicEzy MegaFusion Primer/Sealant and allow 2 hours to cure (at 70ºF/20º C).
  • APPLY and overfill the damage whilst holding a tissue in your spare hand.

How do I apply on vertical surfaces?

To prevent slump or for a FAST dry time use a hairdryer for 3 minutes to form a skin.

3. Level

  • LEVEL at 90º. A gentle touch is required (as if the ‘LEVEL’ is floating on air).

How do I get a gloss finish?

MagicEzy 9 Second Chip Fix dries matte. Add a thin top coat of MagicEzy Hairline Fix for gloss.

4. Trim

  • Clean ‘Level’ with the tissue then TRIM smears around the repair using the level (not the repair itself). Repeat TRIM if necessary. Avoid excessive tampering.

Notes

  • DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days. A second application of 9 Second Chip Fix may be required.
  • DEEP DAMAGE Apply in ¼ inch (6mm) layers and allow to DRY for 2 hours at 70ºF/20º C or 3 minutes using a hairdryer (plus 30mins cool down) then apply the next layer.

How do I apply in hot/cold weather?

In temperatures above 90ºF (30ºC) lay a damp towel over the area until hand temperature is reached. Below 60ºF /15ºC set with hairdryer for 3 minutes.

Fast Delivery

Swift Solutions, Speedy Satisfaction

Competitive Pricing

Unbeatable Quality at Competitive Prices

Approved Quality

Excellence in Every Detail

24/7 Customer Service

Always Available, Always Attentive