Full Product Details
SO-Strong liquid urethane colorants can be added to any liquid urethane rubber, urethane plastic, or urethane foam. They are not compatible with silicone materials. SO-Strong colorants can be used to create a wide range of colour effects for many different applications. For fluorescent colour effects, use fluorescent colorants instead.
Features
SO-Strong colorants are highly concentrated and provide excellent dispersion and consistent colour. A very small amount will colour a large volume of liquid urethane material. Increasing the amount of colorant produces more dramatic colour effects. The recommended loading range is 0.01% to 3% of total system weight. Overloading may result in cure inhibition or surface oozing.
User determines amount to add. If using colorant for the first time, test by adding a few drops to a small batch of material and observe the results. Multiple test castings may be required to achieve the desired colour.
Available colour tints include black, yellow, brown, purple, green, orange, red, and blue.
Available colour pigments include white, light flesh, medium flesh, and dark flesh.
Instructions
The following loading levels are provided as general guidelines. Actual results may vary depending on material and application.
By weight using a gram scale. Add colorant at 0.01% to 3% of the total mixed system weight. Adding more than 3% by weight may cause cure inhibition.
By volume measured in drops. Add 10 drops of colorant per 3 oz (88 ml) of mixed urethane material. When using a translucent urethane system, use one drop to maintain translucency.
Directions for use. Store and use materials at approximately 73°F / 23°C. Wear vinyl gloves to prevent skin contact. After dispensing Parts A and B, add colorant to Part B and mix thoroughly. Combine Parts A and B and mix according to the technical instructions for the specific urethane system.
Blending colours. Different colours can be blended on a palette to create custom colour combinations before adding to the urethane system.
Pantone colour references are approximations only. Final colour appearance varies by material, application method, colour concentration, and processing conditions. The user is responsible for evaluating colour suitability. No warranty is made regarding exact colour matching.
Pickup available at Kelowna, BC
Usually ready in 2-4 days
Tech Specs
Product information
SDS
SO-Strong liquid urethane colorants can be added to any liquid urethane rubber, urethane plastic, or urethane foam. They are not compatible with silicone materials. SO-Strong colorants can be used to create a wide range of colour effects for many different applications. For fluorescent colour effects, use fluorescent colorants instead.
Features
SO-Strong colorants are highly concentrated and provide excellent dispersion and consistent colour. A very small amount will colour a large volume of liquid urethane material. Increasing the amount of colorant produces more dramatic colour effects. The recommended loading range is 0.01% to 3% of total system weight. Overloading may result in cure inhibition or surface oozing.
User determines amount to add. If using colorant for the first time, test by adding a few drops to a small batch of material and observe the results. Multiple test castings may be required to achieve the desired colour.
Available colour tints include black, yellow, brown, purple, green, orange, red, and blue.
Available colour pigments include white, light flesh, medium flesh, and dark flesh.
Instructions
The following loading levels are provided as general guidelines. Actual results may vary depending on material and application.
By weight using a gram scale. Add colorant at 0.01% to 3% of the total mixed system weight. Adding more than 3% by weight may cause cure inhibition.
By volume measured in drops. Add 10 drops of colorant per 3 oz (88 ml) of mixed urethane material. When using a translucent urethane system, use one drop to maintain translucency.
Directions for use. Store and use materials at approximately 73°F / 23°C. Wear vinyl gloves to prevent skin contact. After dispensing Parts A and B, add colorant to Part B and mix thoroughly. Combine Parts A and B and mix according to the technical instructions for the specific urethane system.
Blending colours. Different colours can be blended on a palette to create custom colour combinations before adding to the urethane system.
Pantone colour references are approximations only. Final colour appearance varies by material, application method, colour concentration, and processing conditions. The user is responsible for evaluating colour suitability. No warranty is made regarding exact colour matching.