Tech Specs
9.4L
CEMENT PAL is a clear non-yellowing penetrating acrylic resin formulated to protect and enhance the appearance of concrete, exposed aggregate driveways, interlocking paving stones, patio slabs, concrete blocks, mortar slate, flagstone, terrazzo, and stamped concrete.
CementPal Glaze is higher acrylic content product that has over twice as much acrylic resin and is an excellent value. The Glaze provides a richer gloss and even longer lasting properties. CementPal Glaze provides a rich “wet look” appearance to all the above substrates with exceptional abrasion resistance and film flexibility. Clear Concrete Glaze will help strengthen concrete, provide a clean and easy maintenance surface that resists dirt, oils, grease, acids, alkalis, salts. Clear Concrete Glaze is water based, water shedding seal, which prevents premature aging and spalling of concrete with excellent weathering properties.
SURFACE PREPARATION
Surface must be clean, dry and free of any loose matter or other contaminants. Driveways and patios should be clear of weeds or vegetation. Algae, mold and mildew should be removed using Deckote Cleaner. Grease or oil, which has penetrated the substrate, should be removed using a grease spot remover. Any cracks or damaged areas should be repaired and fully cured before coating. Ideally, surfaces should be power washed, but a thorough wash using a pressure tip on a garden hose is acceptable. Before coating, allow the surface to dry.
CAUTION:
This new technology is water based and will have a milky appearance in the can and when first applied. When properly applied this milky look turns to a clear, shiny, and tough protective coating. This coating requires specific conditions during application to achieve, allow the surface to dry.
