31–40 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length: 26 in. Length is not a separate option.
Choosing MD
Consider MD when reviewing unfilled nylon for friction and wear requirements. Compare Natural as the unfilled baseline or MD-Oil when internal oil lubrication is also needed.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Technical properties and data sheet
Nylatech MD — typical selection data
Density
1.15 g/cm³
Tensile strength
10,500–12,000 psi
Compressive strength at 10% deflection
15,000 psi
Flexural strength
17,000 psi
Elongation
30–40 %
Hardness
80–82 Shore D
Coefficient of friction (dry against steel)
0.25–0.30 dimensionless
Water absorption, 24 hours
0.5 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech MD technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
Pickup currently unavailable at Kelowna, BC
Nylatech MD Cast Nylon 6 Tube — 31–40 in OD
SKU: NMT-31-25.5
It appears you are visiting from a region serviced locally by our Nanaimo Franchise.
31–40 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length: 26 in. Length is not a separate option.
Choosing MD
Consider MD when reviewing unfilled nylon for friction and wear requirements. Compare Natural as the unfilled baseline or MD-Oil when internal oil lubrication is also needed.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Technical properties and data sheet
Nylatech MD — typical selection data
Density
1.15 g/cm³
Tensile strength
10,500–12,000 psi
Compressive strength at 10% deflection
15,000 psi
Flexural strength
17,000 psi
Elongation
30–40 %
Hardness
80–82 Shore D
Coefficient of friction (dry against steel)
0.25–0.30 dimensionless
Water absorption, 24 hours
0.5 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech MD technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
