Norseman Acrylic Drill Bits
Norseman Type 183-AG Chipfree™ acrylic drill bits are designed for drilling acrylic, plastics and laminate. Their 60° Super Chipfree™ point and 0° rake angle help the bit enter gradually and reduce grabbing on breakthrough.
Choose a single bit by diameter, or select a multi-pack in the sizes where one is offered. Diameter options are shown in imperial and metric units. A seven-piece set is also listed.
Diameters and package options
| Diameter | Metric equivalent | Package options listed |
|---|---|---|
| 1/8 in | 3.18 mm | Single, 10-pack |
| 3/16 in | 4.76 mm | Single, 10-pack |
| 1/4 in | 6.35 mm | Single, 10-pack |
| 5/16 in | 7.94 mm | Single, 10-pack |
| 3/8 in | 9.53 mm | Single, 4-pack |
| 7/16 in | 11.11 mm | Single, 4-pack |
| 1/2 in | 12.70 mm | Single, 4-pack |
The seven-piece set contains one bit in each of the listed diameters. Check the product page for current price and stock status by option. Technical details are based on Norseman’s Type 183-AG product information.
Choosing the right size
Select the diameter that matches the hole you need. If the hole is for a fastener, check the required clearance before drilling. For technique guidance, see our guide to working with acrylic sheet. Browse acrylic sheet for material to fabricate.
Frequently asked questions
Are these bits made for acrylic?
Yes. Norseman identifies Type 183-AG as Chipfree™ drills for acrylic, plastic and laminate.
Can I buy a single bit?
Yes. Single bits are listed in all seven diameters. Multi-packs are listed in selected diameters.
What does the seven-piece set include?
It includes one bit in each of the seven listed diameters, from 1/8 in (3.18 mm) through 1/2 in (12.70 mm).
Are speed recommendations listed here?
No verified manufacturer speed range is available in the product information currently used for this page. Follow the tool and material manufacturers’ instructions and test on scrap of the same material.
