19–24 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length is 26 or 52 in, fixed by the OD/ID combination; confirm the selected length. Length is not a separate option.
Choosing SL
Consider SL where external lubrication is difficult. Compare Oil-Filled for liquid-oil lubrication or PVM when evaluating bearing pressure and sliding speed together.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Technical properties and data sheet
Nylatech SL — typical selection data
Density
1.13 g/cm³
Tensile strength
10,000–12,000 psi
Compressive strength at 10% deflection
14,000–15,000 psi
Flexural strength
15,500 psi
Elongation
20–45 %
Hardness
80–84 Shore D
Water absorption, 24 hours
0.3 %
Coefficient of friction, dynamic
0.115
Coefficient of friction, static
0.151
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech SL technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
Pickup currently unavailable at Kelowna, BC
Nylatech SL Cast Nylon 6 Tube — 19–24 in OD
SKU: NST-19-10
It appears you are visiting from a region serviced locally by our Nanaimo Franchise.
19–24 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length is 26 or 52 in, fixed by the OD/ID combination; confirm the selected length. Length is not a separate option.
Choosing SL
Consider SL where external lubrication is difficult. Compare Oil-Filled for liquid-oil lubrication or PVM when evaluating bearing pressure and sliding speed together.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Technical properties and data sheet
Nylatech SL — typical selection data
Density
1.13 g/cm³
Tensile strength
10,000–12,000 psi
Compressive strength at 10% deflection
14,000–15,000 psi
Flexural strength
15,500 psi
Elongation
20–45 %
Hardness
80–84 Shore D
Water absorption, 24 hours
0.3 %
Coefficient of friction, dynamic
0.115
Coefficient of friction, static
0.151
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech SL technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
