Blog
Resources
How to Fair a Surface with Epoxy and Low-Density Filler
A practical fairing-compound workflow from identifying lows and mixing low-density filler to broad application, cure and controlled sanding.
How to Bond Wood, Fiberglass and Metal with Epoxy
A step-by-step epoxy bonding method for wood, fibreglass and metal, from surface preparation and wet-out to thickening, clamping and cure.
How to Apply an Epoxy Barrier Coat to a Fiberglass Hull
A planning and application guide for epoxy barrier coating a fibreglass hull, including diagnosis, drying, preparation, film build and antifouling...
Vacuum Bagging Composite Laminates: Setup and Troubleshooting
A practical vacuum-bagging workflow covering the laminate stack, peel ply, release film, breather, bag sealing, leak checks and cure monitoring.
Final Fairing Before Paint: Sanding, Guides and Inspection
A finishing workflow for checking, guide-coating and sanding a fair surface before high-build primer and topcoat.
How to Apply Fiberglass Fabric with Epoxy
A practical wet-layup method for applying woven fibreglass fabric with epoxy, including cutting, wet-out, consolidation and cure checks.
G/flex Epoxy for Tough Bonding and Flexible Repairs
When and how to use G/flex toughened epoxy for impact-prone bonding and repairs in wood, metal, fibreglass and selected plastics.
How to Use Epoxy Resin: A Practical Beginner Guide
A practical introduction to two-part epoxy resin, from surface preparation and accurate metering through mixing, application, cure and troubleshooting.