Fixed length: 52.0 in. Sold per piece (EA). Quantity 1 = one tube at this fixed length.
Full Product Details
Nylatech Natural-Oil Cast Nylon 6 Tube. Oil-lubricated cast PA6 for wear parts with food-contact documentation requirements.
Select your tube size
6.25–10.5 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length: 52 in. Length is not a separate option.
Choosing Natural-Oil
Consider this grade when internal lubrication and food-contact requirements both matter. Compare Natural for unfilled nylon, or Oil-Filled for the separate green oil-lubricated grade.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Food contact: The manufacturer reports Natural and Natural-Oil meet 21 CFR 177.1500. Confirm the supplied grade’s declaration for your food-contact conditions; this does not certify the finished part.
Technical properties and data sheet
Nylatech Natural-Oil — typical selection data
Density
1.14 g/cm³
Tensile strength
10,000 psi
Compressive strength at 10% deflection
14,000–15,000 psi
Flexural strength
13,000 psi
Elongation
35–40 %
Hardness
80 Shore D
Coefficient of friction (dry against steel)
0.17–0.19 dimensionless
Water absorption, 24 hours
0.3 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech Natural-Oil technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
Pickup currently unavailable at Kelowna, BC
Nylatech Natural-Oil Cast Nylon 6 Tube — 6.25–10.5 in OD
SKU: NNOT-6.25-3
It appears you are visiting from a region serviced locally by our Nanaimo Franchise.
Nylatech Natural-Oil Cast Nylon 6 Tube. Oil-lubricated cast PA6 for wear parts with food-contact documentation requirements.
Select your tube size
6.25–10.5 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length: 52 in. Length is not a separate option.
Choosing Natural-Oil
Consider this grade when internal lubrication and food-contact requirements both matter. Compare Natural for unfilled nylon, or Oil-Filled for the separate green oil-lubricated grade.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Food contact: The manufacturer reports Natural and Natural-Oil meet 21 CFR 177.1500. Confirm the supplied grade’s declaration for your food-contact conditions; this does not certify the finished part.
Technical properties and data sheet
Nylatech Natural-Oil — typical selection data
Density
1.14 g/cm³
Tensile strength
10,000 psi
Compressive strength at 10% deflection
14,000–15,000 psi
Flexural strength
13,000 psi
Elongation
35–40 %
Hardness
80 Shore D
Coefficient of friction (dry against steel)
0.17–0.19 dimensionless
Water absorption, 24 hours
0.3 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech Natural-Oil technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
