14.5–18 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length is 26 or 52 in, fixed by the OD/ID combination; confirm the selected length. Length is not a separate option.
Choosing Natural
A starting point for general wear components. Compare Oil-Filled when internal lubrication is needed, or Blue for heat-stabilized material.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Food contact: The manufacturer reports Natural and Natural-Oil meet 21 CFR 177.1500. Confirm the supplied grade’s declaration for your food-contact conditions; this does not certify the finished part.
Technical properties and data sheet
Nylatech Natural — typical selection data
Density
1.15 g/cm³
Tensile strength
10,500–12,000 psi
Compressive strength at 10% deflection
15,000 psi
Flexural strength
17,000 psi
Elongation
30–40 %
Hardness
80 Shore D
Coefficient of friction (dry against steel)
0.36–0.42 dimensionless
Water absorption, 24 hours
0.5 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech Natural technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
Pickup currently unavailable at Kelowna, BC
Nylatech Natural Cast Nylon 6 Tube — 14.5–18 in OD
SKU: NNT-14.5-4
It appears you are visiting from a region serviced locally by our Nanaimo Franchise.
14.5–18 in outside diameter (OD). Select OD, then inside diameter (ID).
Sold each (EA): quantity 1 = one complete tube. Standard length is 26 or 52 in, fixed by the OD/ID combination; confirm the selected length. Length is not a separate option.
Choosing Natural
A starting point for general wear components. Compare Oil-Filled when internal lubrication is needed, or Blue for heat-stabilized material.
Tube is machining stock for bushings, sleeves and rings, not finished bearings or pressure-rated pipe. Nominal wall thickness = (OD − ID) ÷ 2.
Allow for machining: dimensions are nominal stock sizes, not finished-part tolerances. Nylon absorbs moisture; consider dimensional change, temperature, chemicals and operating loads when specifying close-fitting parts.
Food contact: The manufacturer reports Natural and Natural-Oil meet 21 CFR 177.1500. Confirm the supplied grade’s declaration for your food-contact conditions; this does not certify the finished part.
Technical properties and data sheet
Nylatech Natural — typical selection data
Density
1.15 g/cm³
Tensile strength
10,500–12,000 psi
Compressive strength at 10% deflection
15,000 psi
Flexural strength
17,000 psi
Elongation
30–40 %
Hardness
80 Shore D
Coefficient of friction (dry against steel)
0.36–0.42 dimensionless
Water absorption, 24 hours
0.5 %
Typical values, not finished-part performance guarantees. Compressive strength is at 10% deflection; dry-friction values refer to steel where stated. Nylatech Natural technical data.
For custom tube sizes or lengths, or CNC-machined parts, send grade, OD, ID, length and piece count. Include a drawing and required tolerances for machined parts. Request custom work.
