Epoxy, Resins & Adhesives Learning Centre
Learn how to select, mix, bond, laminate, fill, fair and troubleshoot epoxy, polyester resin and industrial adhesives.
Use these guides to choose the right material, plan the work, avoid common failures and connect practical technique with products available from GoIndustrial.
Learning Centre / Epoxy, Resins & Adhesives
Start here
How to Repair Vinyl Inflatables with HH-66 Vinyl Cement
A punctured PVC inflatable can often be repaired with a properly fitted patch and HH-66 Vinyl Cement. The critical first step is confirming that the inflatable is compatible PVC vinyl—not polyethylene, an unknown coated fabric or extremely thin…
Read the guideCan You Glue Polyethylene? Adhesives, Preparation and Welding
Yes—polyethylene can be adhesively bonded, but ordinary household glue usually performs poorly. HDPE and LDPE have low-surface-energy, chemically resistant surfaces, so a dependable joint needs a purpose-designed adhesive system, the specified…
Read the guideEpoxy vs. Polyester Resin: Which Should You Use?
Epoxy and polyester are both thermosetting resin families used with fiberglass, but they are not interchangeable. Polyester remains efficient for controlled moulded production and gelcoat systems; epoxy is usually the stronger choice for secondary…
Read the guideMore Epoxy, Resins & Adhesives guides
How to Apply Epoxy Floor Coating to a Garage Floor
A practical garage-floor epoxy guide covering concrete assessment, moisture checks, cleaning, mechanical preparation, crack repair, mixing, application and cure protection.
Read the guideWEST SYSTEM Epoxy: Product Selection and User Guide
A searchable guide to WEST SYSTEM epoxy selection and use, including resin and hardener choices, metering, fillers, bonding, fairing, coating, cure and safe handling.
Read the guideEpoxy Problems: Causes, Fixes and Prevention
A searchable epoxy troubleshooting guide for incomplete cure, bond failure, bubbles, cloudy films, fisheyes, amine blush, sagging and excessive heat.
Read the guideWhat Is Bio-Based Epoxy? Renewable Content Explained
A practical explanation of bio-based epoxy, renewable feedstocks, performance data, lifecycle claims and the questions to ask before choosing a system.
Read the guideHow to Fair a Surface with Epoxy and Low-Density Filler
A practical fairing-compound workflow from identifying lows and mixing low-density filler to broad application, cure and controlled sanding.
Read the guideEpoxy Surface Preparation for Wood, Fiberglass and Metal
Material-specific surface preparation for epoxy bonding and coating, including cleaning, drying, abrasion, amine blush and contamination control.
Read the guideHow to Pour a Clear Epoxy Tabletop Coating
A practical clear tabletop epoxy workflow covering surface sealing, accurate mixing, bubble control, pouring, edge management and cure protection.
Read the guideG/flex Epoxy for Tough Bonding and Flexible Repairs
When and how to use G/flex toughened epoxy for impact-prone bonding and repairs in wood, metal, fibreglass and selected plastics.
Read the guideHow to Use Epoxy Resin: A Practical Beginner Guide
A practical introduction to two-part epoxy resin, from surface preparation and accurate metering through mixing, application, cure and troubleshooting.
Read the guideHow to Add Fillers to Epoxy for Bonding and Fairing
How to choose and add epoxy fillers for structural bonding, fillets, fairing and coating, with practical consistency and dust-control guidance.
Read the guideHow to Apply an Epoxy Barrier Coat to a Fiberglass Hull
A planning and application guide for epoxy barrier coating a fibreglass hull, including diagnosis, drying, preparation, film build and antifouling timing.
Read the guideHow to Apply Fiberglass Fabric with Epoxy
A practical wet-layup method for applying woven fibreglass fabric with epoxy, including cutting, wet-out, consolidation and cure checks.
Read the guideHow to Choose the Right Adhesive for Plastic, Metal and Wood
A practical adhesive-selection framework for plastic, metal, wood and mixed-material joints, with preparation, testing and failure-prevention guidance.
Read the guideVacuum Bagging Composite Laminates: Setup and Troubleshooting
A practical vacuum-bagging workflow covering the laminate stack, peel ply, release film, breather, bag sealing, leak checks and cure monitoring.
Read the guideFinal Fairing Before Paint: Sanding, Guides and Inspection
A finishing workflow for checking, guide-coating and sanding a fair surface before high-build primer and topcoat.
Read the guideHow to Bond Wood, Fiberglass and Metal with Epoxy
A step-by-step epoxy bonding method for wood, fibreglass and metal, from surface preparation and wet-out to thickening, clamping and cure.
Read the guideNeed help choosing?
Tell us what you are making, repairing or maintaining. Include the materials, dimensions, service conditions and the result you need.
Shop related productsAsk Technical Solutions